Use CCD from old Handycam

Hi, I have the CCD board including lens and motors from an old Sony CCD-F350E Video 8 Handycam. This may be a dumb question, but is it possible to use the composite signal from this board. If yes, what voltage does the board require and where do I make the connection. I am not interested in the zoom and autofocus parts, only the composite output. The board is marked CD-40P and has two cables with 13 and 15 connectors plus one schielded cable which I hope is the composite signal. Any help would be much appreciated. Peter

Reply to
Peter Scholl
Loading thread data ...

o/p is 2 pin W602

15 pin W601 pin 11, 5V 10, 32V 9, 15V 4, Gnd

-- Diverse Devices, Southampton, England electronic hints and repair briefs , schematics/manuals list on

formatting link

Reply to
n cook

ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.