JVC AV-32F713 Picture Problems

First, make sure you don't have an actual electronic problem. Otherwise, you will "tweak", when you should not. Be carefull what you adjust, & write it down. Dani.

With TV powered ON press: [DISPLAY] and [VIDEO STATUS] on the remote at the same time.

-or- Press the [SLEEP TIMER] key and set the SLEEP TIMER for "0" MIN. While the SLEEP TIMER information is still on screen, press the [DISPLAY] key and [VIDEO STATUS] key of the remote control unit at the same time to enter the SERVICE MENU.

Exit the service menu by twice pressing the [EXIT] key on the remote.

I think I found your wesite when I was searching for this topic...the problem is that I don't have the original remote. What kind of electrical problems are you talking about? Thanks

He means don't try to adjust it if the picture problems are being caused by an electronic failure and not simply out of adjustment. If you do try to adjust it make sure you write down the setting number for each thing you adjust. This way if you find it cannot be adjusted you can return the settings to what they were and then effect an electronic repair to correct the problem.