Insignia is-pd040922 7" portable dvd player with "no disk"

have an Insignia is-pd040922 7" portable dvd player with "no disk" problem on all video dvd's. Have cleaned the lens, cleaned the sliding mechanism with no help.

Tried with an Audio CD and this works fine, so probably lets out the above causes, as well as the spindle motor Searching on google finds hundreds of similar complaints about Insignia . Does the CD use the same laser and lens as the dvd ? Would appreciate any other ideas to try before I give up on this machine

Reply to
Ray
Loading thread data ...

"Ray"...

** CDs use an infra-red laser while DVDs use a visible red one. 758nm as compared to 657 nm.

.... Phil

Reply to
Phil Allison

Thanks Phil...

I guess these lasers must be integrated into the same lens, cause I cant see

2 different optical units..

Ray

Reply to
Ray

On Fri, 16 Dec 2011 19:45:43 -0800, "Ray" put finger to keyboard and composed:

Here is a reference circuit for a Cheertek chipset:

formatting link

You can see the pinout of a Hitachi HOP-1200W optical pickup at the top of page 3. Notice that there are separate pins for the DVD and CD laser diodes (DVDLD and CDLD).

- Franc Zabkar

--
Please remove one 'i' from my address when replying by email.
Reply to
Franc Zabkar

formatting link

Thanks Frances

I found what looks to be the same assembly as mine on ebay

formatting link

Do you think it would work without much adjusting ? Everything looks fixed except for 2 little round things on the side of the pickup that might be pots, except I dont see a screwdriver slot. Looking at your diagram I cant spot any adjustments

for only about $10 it might be worth trying

Ray

Reply to
Ray

On Sun, 18 Dec 2011 18:04:19 -0800, "Ray" put finger to keyboard and composed:

I used the Hitachi pickup as a general example that illustrates the point that there are two laser diodes in a DVD player. I have no idea what kind of pickup is actually used in your unit.

BTW, it's "Franc", originally pronounced as in Franz, but pronounced as "Frank" when anglicised. And Frances is a female name -- Francis is male. :-)

- Franc Zabkar

--
Please remove one 'i' from my address when replying by email.
Reply to
Franc Zabkar

Sorry Franc, I guess I didnt think about this being an international group... Need to be more careful...

Actually I did not use your info to look up the pickup. Thats a coincidence

I had already googled the part number on the pickup which is

5f28046446e61200 which eventually led me to the ebay unit which looks identical to mine, so I guess the question still is "If this is the right Pickup would it require complicated adjustment, or is there a reasonable chance it would just work ? " I'm willing to gamble if the chances are at least 50 50, just for the experience.

Ray

Reply to
Ray

On Sun, 18 Dec 2011 23:56:58 -0800, "Ray" put finger to keyboard and composed:

I don't trust anything on eBay, but that may be just my paranoia.

That said, I believe the unit should just drop in. I haven't ever changed a DVD pickup (they've always been uneconomically priced), but CD pickups have a solder blob that protects the assembly from ESD during transit. This blob needs to be removed.

Perhaps someone else could advise you.

- Franc Zabkar

--
Please remove one 'i' from my address when replying by email.
Reply to
Franc Zabkar

I ordered the part.... The seller has 100 percent good feedback, and sells all types of pickups.

Will report when I get it..

Ray

Reply to
Ray

The part came from Hong Kong, no problems.. took about 2 weeks

NEW HITACHI CD DVD Laser Lens Head Optical HOP-1200W HOP-1200W-B US

I installed it, and first try with an audio cd worked ok. but.. a dvd video would not work. but I noticed it searched around longer than before. but eventually still "no disk" I googled around and found a data sheet for this pickup, and found there were 2 adjustment pots on the pickup, One for the dvd pickup and one for the cd pickup. Kept adjusting the dvd pot in small increments, and now I am watching video.

Now I wonder if I had adjusted the old head, if it would have worked.

Ray

Reply to
Ray

ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.