But angles are the units that the manufacturer provides for toe while I'm almost certainly going to measure toe with a distance measurement.
The manufacturer specifies the "total toe" as 0 degrees 14 minutes plus or minus 10 minutes:
The manufacturer specifies a "total toe" required accuracy of plus or minus
2 minutes in a measuring range of plus or minus two degrees with a total measuring range of plus or minus 18 degrees.So this confusion is all my fault.
Clearly I'm confused because the way I think of toe is linear, but the manufacturer specifies toe in angles, so I should not have brought up toe in the first place.
Camber is simpler because the manufacturer specifies angles and the measurement is in angles.
So we should stick with camber for this thread (because it's a simpler problem).