1. Home
  2. Field-Programmable Gate Arrays
  3. ERROR:Pack:1564: ML403 & Xilinx Platform Studio 7.1.02i

ERROR:Pack:1564: ML403 & Xilinx Platform Studio 7.1.02i

Hello,

just tried to get the ml403_emb_ref-project working. During MAP I get 8 errors of the following type:

ERROR:Pack:1564 - The dual data rate register plb_ddr_0/plb_ddr_0/DDR_CTRL_I/IO_REG_I/DDR_DQS_REG_V4_I3 failed to join the OLOGIC component as required The OLOGIC SR signal does not match the ILOGIC SR signal, or the ILOGIC SR signal is absent. The OLOGIC REV signal does not match the ILOGIC REV signal, or the ILOGIC REV signal is absent.

Any hints?

Thanks and greetings Udo

Reply to
Udo
Loading thread data ...

I'm having these errors too. Anyone who had that problem? Udo, did yo get that fixed?

Kelvin

Reply to
kelau

Under EDK, did you try tools : clean : all? I'm using EDK 7.1.02i ISE

7.1.04i

Newman

Reply to
Newman

ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.