Hi,
I test the EDK 9.2 MicroBlaze Tutorial
formatting link
for my Spartan3e Starter Board Rev.D using XPS 9.2.02i. After the bitsream is uploaded, the TestApp_memory is started and got on rs232:
-- Entering main() -- Starting MemoryTest for DDR_SDRAM: Running 32-bit test...FAILED! Running 16-bit test...FAILED! Running 8-bit test...FAILED!
-- Exiting main() --
I know, there was a problem using the MIG for this board. Is this my problem? and is it solved now?
Thanks, Olaf