Hi, I have a project based on MicroBlaze. Everything works fine, I debug software in SDK. But now I need to check in/out signals and transmission between IPs. So I add Chipscope ICON and ILA (I also tried with VIO) in EDK from IP Catalog (I also tried with Hardware/Debug Configuration). When I make Bitstream Generation it shows:
ERROR:MDT - platgen failed with errors!
I found something like that in xflow.log:
"ERROR:MapLib:661 - LUT3 symbol "chipscope_icon_0/chipscope_icon_0/icon_inst/icon_1/u_icon/u_tdo_mux/no_lut6/ i4/fj/0/u_lut3" (output signal=chipscope_icon_0/chipscope_icon_0/icon_inst/u_icon/u_tdo_mux/no_lut6/i 4/t1_7) has input signal "chipscope_icon_0/control0" which will be trimmed. See the trim report for details about why the input signal will become undriven."
Thanks for any help, Dominik