Phase Meter Circuit

Sep 21, 2004 7 Replies

Hi Does anyone have a circuit for a phase meter upto 1MHz?



Cheers



Wayne


I read in sci.electronics.design that Wayne wrote (in ) about 'Phase Meter Circuit', on Tue, 21 Sep 2004:

There was an extremely simple one published in 'Electronics World' quite a long time ago - July 1986. One 4027 and two BC109s.

Regards, John Woodgate, OOO - Own Opinions Only. The good news is that nothing is compulsory. The bad news is that everything is prohibited. http://www.jmwa.demon.co.uk Also see http://www.isce.org.uk

Surely it was 'Wireless World' back then John ?

Graham

ISTR that such a circuit was published an an Idea for Design in either Electronics or EDN magazine many years ago. Seems like it could handle signals up into the megahertz range too. I think I still have a copy of it.. I saved a ton of those design ideas, and used many of them in my own work. I'll look for it tomorrow.. . send you a copy when I find it.

Cheers,

Dave M MasonDG44 at comcast dot net (Just subsitute the appropriate characters in the address) Never take a laxative and a sleeping pill at the same time!!

Hi Dave I would appriciate it if you could find one and scan it in. And maybe send it to snipped-for-privacy@wlawson-nospam-.com. (remove -nospam).

Cheers

Wayne

During 1986 it was 'Electronics and Wireless World'.

Regards, John Woodgate, OOO - Own Opinions Only. The good news is that nothing is compulsory. The bad news is that everything is prohibited. http://www.jmwa.demon.co.uk Also see http://www.isce.org.uk

Here's a link to an Intersil app note that describes a phase emter that works up to 10 MHz:

formatting link

Thomas Philips

Analog Devices has the AD8302, a single chip solution, up to 2.7GHz. It even does amplitude ratio between the two inputs. To good to be true!

Reinier Gerritsen

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required