Embedded Programming

suspicious RAM problems - mvo

Hi group, My company is doubting my applications; there are happening strange things in the field. It's about terminal...

4 comments posted 23yrs

posted by nospamm.spamlessvanoortttt

4 comments posted 23yrs posted by nospamm.spamlessvanoortttt

Re: WTD: Embedded industry links

Thanks for the links... > in Holland we have: > http://www.bits-chips.nl/ Pity this one isn't in English, unless I miss...

0 comments posted 23yrs

posted by laguest

0 comments posted 23yrs posted by laguest

SmartPhones, PDA application processors interfaces

Hi, My company is developing a product that will be integrated into smartphones and PDAs. We are in the process of deci...

1 comments posted 23yrs

posted by mr_syzygy

1 comments posted 23yrs posted by mr_syzygy

Re: PLL / DPLL phase question

> I am desinging a Digital-PLL and I'm trying to figure out what DAC > resolution I need to drive my VCO given a .1 deg...

7 comments posted 23yrs

posted by thadsmith

7 comments posted 23yrs posted by thadsmith

Ethernet switch/hub

For a new design I have to embed a 6 port ethernet hub onto a system. I've never looked at ethernet before and don't re...

5 comments posted 23yrs

posted by tmb

5 comments posted 23yrs posted by tmb

MCF5282 Coldfire Compiler

Hi, I have to compile a project using a Coldfire compiler valid for MCF5282. Taking a look over the Internet I've found...

3 comments posted 23yrs

posted by earth

3 comments posted 23yrs posted by earth

Re: Embedded industry links

Hi Luke Check out www.embedded.co.uk . They are involved with annual exhibitions and product a monthly magazine in the...

0 comments posted 23yrs

posted by simon

0 comments posted 23yrs posted by simon

Ne Pointers for GNU Tools for ARM926EJ

Hi Grp, I want to know if any GNU tools are available for cross compilation/ linking/debugging for ARM926EJ-S core? I c...

2 comments posted 23yrs

posted by itsbhanu

2 comments posted 23yrs posted by itsbhanu

Inexpensive JTAG programmer for TMS320LF24xx?

For a small series production we are looking for an inexpensive programmer for the tms320lf2406A. No emulation is requi...

2 comments posted 23yrs

posted by mviotto

2 comments posted 23yrs posted by mviotto

Newbie .. how to go about learning..

Hi .. i m new to embedded systems and would like to learn about the same. I would like to have your views on how should...

1 comments posted 23yrs

posted by udayan_singh

1 comments posted 23yrs posted by udayan_singh

Re: Turn a divide into a multiply

> > I'm working on an Atmel AT89C51RD2 based circuit that will need to slide > between two arbitrary DAC values at a co...

30 comments posted 23yrs

posted by jim.granville

30 comments posted 23yrs posted by jim.granville

cs8900 not reciveing frames

Hi all I'm facing an odd problem with a cs8900a ethernet controller in that it does not seem to be possible to recive a...

1 comments posted 23yrs

posted by m.zingg

1 comments posted 23yrs posted by m.zingg

time measurement with Pic16F84

I am using PIC 16F84 for my project and I need to measure the time interval between two rising edges of input signal. I...

4 comments posted 23yrs

posted by yusufekici

4 comments posted 23yrs posted by yusufekici

Re: M32C/83: problem with pointers

>Hi folks, > > I'm debugging a board I designed. The features are: > > Micro: M32C/83 Renesas (512 kByte internal flash...

3 comments posted 23yrs

posted by m.zingg

3 comments posted 23yrs posted by m.zingg

Re: Brushless DC motor suggestions

> Hello all. > > I am looking for a brushless DC motor for a robotic application. I'm > having little luck finding a ve...

3 comments posted 23yrs

posted by stef33d

3 comments posted 23yrs posted by stef33d