[lekko OT] LANNET MULTINET LET36 I HPJ2410A - czy znacie te sprzety?

"Bartek" <NIELUBIEheavy snipped-for-privacy@op.pl wrote in message news:fuajec$4hg$ snipped-for-privacy@inews.gazeta.pl...

"LANNET MultiNet LET-36 LANswitch:

LANNET's LET-36 chassis can accept switching and nonswitching modules. The result is a product that is not quite a hub in the classic sense, but neither is it in the same category as the other switching hubs. The LET-36 has a high-speed channel on its backplane, as well as four Ethernet speed channels. The high-speed bus accommodates only Ethernet and Fast Ethernet modules. You can install a Wellfleet FDDI router module, but it interfaces only the four Ethernet buses. To go from FDDI to the switching fabric requires external cables to connect between the different modules that LANNET supports. LANNET refers to its switching architecture as protocol-independent; that means no routing support and only topologies that use Ethernet frame styles. Unlike the other switches, the LET-36 doesn't support the spanning tree protocol. Instead, LANNET supports something it calls hardware-based redundant links. So use caution before adding this switch into a bridged network dependent on a spanning tree. Because LANNET's switching modules include only Ethernet and Fast Ethernet, we were only able to test IPX and AppleShare protocols, which worked well. Configuring the LET-36 was difficult. LANNET has chosen to incorporate modules for a number of other vendors, each with their own configuration interface. On the positive side, LANNET's GUI configuration utility that runs under HP OpenView allows for easy configuration of virt ual LANs and the switching bus. You should know exactly what you're doing; the software provides no feedback on why certain operations cannot be completed. For all its strangeness, the LET-36 is a fairly economical system. Many of the modules can support only a few addresses per port and are meant to be directly connected to end-user systems."

use a google...

jesli sie pytasz czy ktos ci to kupi jak wystawisz na allegro to moge powiedziec tylko nie mam zielonego pojecia...

U¿ytkownik "PAndy" <pandrw_cutthis snipped-for-privacy@poczta.onet.pl> napisa³ w wiadomo¶ci news:fuakcc$ptl$ snipped-for-privacy@news.onet.pl...

Bartek pisze:

No to wiesz w końcu czy nie wiesz? Chcesz żeby ktoś przetłumaczył ci opis? No to wal do tłumacza.

no to w takim razie ja nie wiem o co ci chodzi