Connector Question

solid wire? I don't like tripe connectors. ;)

Stranded. ...Jim Thompson

-- | James E.Thompson | mens | | Analog Innovations | et | | Analog/Mixed-Signal ASIC's and Discrete Systems | manus | | San Tan Valley, AZ 85142 Skype: Contacts Only | | | Voice:(480)460-2350 Fax: Available upon request | Brass Rat | | E-mail Icon at

Those are hoojangers, sometimes called doohickeys.

They're in the hell box. ;-)

Lord Valve Jiveass

:-D

What I'm trying to do is cut lamps lose from the remote, so that the lamps turn on and off via a wall switch.

Poking around in the guts I find a "DawnSun Power Limiter", which might seem to be a dimmer (*). Anyone know about such things?

(*) Which seems sort of dumb... lamp is Halogen, and my understanding is Halogen's when dimmed, suffer lifetime ?? ...Jim Thompson

...

You know - after taking another look, those sure do remind me of one-pin Molex connectors. You don't see 'em on modern stuff, but old SS guitar amps are full of the damn things, especially Peaveys.

Ya think?

LV

They twist lock, but I don't need to find them anymore, I found this...

The government sticks it nose up my ass... again :-(

I'll just cut it out, up-top, and add a separate feed wire from the ceiling.

Problem solved. ...Jim Thompson

Those are the connectors usually used to power the light bulb at the center of the ceiling fan. There's a lousy photo of the connectors at: (top photo) The idea is to prevent you from doing a creative wiring job and installing something like a wall outlet, oversized light fixture, heater, or whatever else you're planning to hang from the fan.

I just happen to have a ceiling fan in a box handy. These are the mating connectors:

No clue who made the connectors or where to buy them. You can probably obtain the matching light figure, with connectors, from the unspecified fan manufacturer for an outrageous price. You can also cut off the connectors and use a crimp splice or insulated blade connectors.

Hire an electrician. Anything much past 3.3 volts, you're a danger to the public and yourself.

Nice find. I just compared the dimensions in the drawing with the lamp base in my photo and found the mating parts to be identical. The lengths are a little different, which doesn't really matter:

PALwHUB :-(

BTW, My father was an electrician _before_ he got into the Radio & TV, hardware store and apartment houses businesses... and I used to function as his assistant on weekends when I was a kid >:-}

Isn't it time you grew up? ...Jim Thompson

Grow up? And spend my declining years at home, fixing broken wine racks and rusty outdoor grilles? No thanks.

You don't pay a lot of attention do you? Perhaps a reading comprehension problem? I'm hardly "declining", I'm now experienced in the use of Cadence Virtuoso Tools.

And the wine rack wasn't broken... I built up one, stained it to match the butler pantry cabinets and installed it.

And the grille, double-dumbass, is stainless.

Isn't it time you grew up? ...Jim Thompson

Those power limiters prevent you from using a higher wattage lamp. I guess they're cheaper than designing an enclosure that won't catch fire. My house came with one and it's pretty accurate about what lamp it will allow.

I recommend the current generation of LED lamps. No flicker, no delay, good color balance, no burnouts from on/off cycles, and they're extremely efficient with dimmers. Since they're so efficient, they don't trip those power limiters either.

(Dimming halogen is harmless. The halogen doesn't work at low temperatures but then the filament isn't evaporating at low temperatures either. What you can't do is alter a halogen bulb's enclosure. The bad part about dimming halogen bulbs is that the efficiency is especially awful.)

We're in a new house... came with those gawd-awful CFL's everywhere.

I'm gradually replacing everything with LED's.

The "broken" wine glass rack O:-) area originally had a CFL that stuck down too far for me to properly place the glass rack, so I found some flat profile LED's that produce twice as many Lumens, and you can't even tell they are there... though they make the glassware just GLOW ;-) ...Jim Thompson

Managed to cut out the power limiter, and do all rewiring top-side, so no additional connector needed. Presently 100W Halogen, but a ton of working room... I can probably fit the LED equivalent of light output quite easily. ...Jim Thompson

They look like some sort of automotive connector, although that's probably wrong.

Connector Question, What is this type of connector called, and where do you get it...

(in a ceiling fan)

...Jim Thompson

Jim,

Indeed that was a single pin Molex, female. The black box marked Power Limiter, is probable a "wattage limiter", required since 2009 by the DOE to prevent ceiling fan lighting to exceed 190Watts. It originally was a method to limit the wattage on multi-socket lights in which the consumer could use higher wattage bulbs. Now we see them in single lamp halogen fixtures too.

If either the connectors or the limiter gives trouble, they can be removed.

Scott Dunedin, FL

Already done ;-) ...Jim Thompson

those are one shot quick solid wire connectors.. found in many cheap lighting fixtures and ballast lead wires, etc..

You simply push in the solid wire and the spring pin won't let you pull it out!

Jamie