STD12NE06 pspice model

Doesn't appear to be out there on the web.

Maybe Win Hill has characterized this part?

...Jim Thompson

-- | James E.Thompson, P.E. | mens | | Analog Innovations, Inc. | et | | Analog/Mixed-Signal ASIC's and Discrete Systems | manus | | Phoenix, Arizona Voice:(480)460-2350 | | | E-mail Address at Website Fax:(480)460-2142 | Brass Rat | |

OK, send me $20 for 2 minutes work.

• MODELLING FOR STD12NE06L .SUBCKT STD12NE06L 1 2 3 LG 2 4 7.5n LS 12 3 7.5n LD 6 1 4.5n RG 4 5 2.227 RS 9 12 0.242E-02 RD 7 6 0.273E-01 RJ 8 7 0.386E-01 CGS 5 9 0.877E-09 CGD 7 10 0.103E-08 CK 11 7 0.134E-10 DGD 11 7 DGD DBS 12 6 DBS DBD 9 7 DBD MOS 13 5 9 9 MOS L=1u W=1u E1 10 5 101 0 1 E2 11 5 102 0 1 E3 8 13 POLY(2) 6 8 6 12 0 0 0 0 0.152E-02 G1 0 100 7 5 1u D1 100 101 DID D2 102 100 DID R1 101 0 1MEG R2 102 0 1MEG .ENDS STD12NE06L

.MODEL MOS NMOS

• LEVEL = 3
• VTO = 2.126
• PHI = 0.927
• IS = 0
• JS = 0
• THETA = 0.723E-02
• KP = 10.203
• Vmax = 195733
• Kappa = 0.184E-02
• eta = 0.167E-04

.MODEL DGD D

• IS = 0.1E-12
• CJO = 0.141E-09
• VJ = 0.662
• M = 0.307 .MODEL DBD D
• IS = 0.1E-12
• CJO = 0.181E-10
• VJ = 0.793
• M = 0.352 .MODEL DBS D
• IS = 0.1E-12
• BV = 66
• N = 1
• TT = 0.531E-09
• RS = 0.151E-02 .MODEL DID D
• IS = 0.01E-12
• RS = 0
• BV = 76

• END OF MODELLING