Perpetual Motion Failure!

CoreyWhite · 2007-01-03T03:43:27+00:00

So I have been working constantly since 2:00PM EST on my perpetualmotion machine. All the parts I ordered arived on my doorstep, and Iwent straight to work. I got one $300 wind generator, that could crankout a wapping 1.5 volts, (but don't ask me what the wattage on thething is). And I got a low voltage 0.3volt motor.But low and behold I found out my famous quadrupole magnet wasn'tstrong enough to spin the generator, even when I used the strongestmagnets in my collection I had to get it spinning. So I got a fewdifferent sized washers from the hardware store, and I build aquadrupole around the generator, with my real presicion made quadrupoleat the center. And wouldn't you know that the thing spun like crazy?It worked so much better using the real quadrupole at the center, and Iarranged 6 magnets underneath it, and around the generators axel inanother quadrupole. I doubled up the strength of 2 of them and usedsmaller magnets for the four others. They switched polarities half wayaround the circumfrence of the generator. And boy did it spin.The only problem was that my motor didn't have enough torque. And tocompensate for this, I put a long piece of plastic on the end of mymotor, and stuck magnets to the end of the plastic. That way when themotor spins the magnets turn around a larger circumfrence. This seemedto work, and when I turned the motor on with a AA Battery, my generatorwould complete 3 or 4 rotations before the magnets on the motor wouldstop and stick the the magnets on the generator. That sucked, and Icould tell the problem was that the motor was spinning too fast insteadof using all the torque it had.So I see a few options I can try. I can get a lower voltage generatorthat will spin only using my quadrupole magnet. Or I can get a highertorque motor, that will spin my generator when I am using my fabricatedquadrupole with super strong magnets. But first I am going to try toget some gears for the equipment I already am experimenting with toturn...

Jan 03, 2007 48 Replies

Rate this thread:

Autymn D. C. 19 years ago

Wrong, everything is in perpetual motion, and everything is a makine.

Vote

Autymn D. C. 19 years ago

Wrong, s*****ad:

formatting link

Vote

The_Man 19 years ago

Just becuase your asshole is in perpetual motion, doesn't mean that EVERYTHING is.

If you don't know what a "makine" (machine?) is, go stick your hand (an yo' mama) into a machine (or play with your Barbies in that frilly dress you've had your eyes on for so long).

Vote

Autymn D. C. 19 years ago

formatting link

-Aut

Vote

Autymn D. C. 19 years ago

I'v no donkey.

It's makine. Learn H=E8llenic or die. Every body is a makine, so your nonpoint is not takene.

-Aut

Vote

Don Lancaster 19 years ago

Bruno.

He is Lego's attitude relateralization facillitator.

Many thanks, Don Lancaster voice phone: (928)428-4073 Synergetics 3860 West First Street Box 809 Thatcher, AZ 85552 rss: http://www.tinaja.com/whtnu.xml email: don@tinaja.com Please visit my GURU\'s LAIR web site at http://www.tinaja.com

Vote

Phineas T Puddleduck 19 years ago

Are you a polymoron?

This space reserved for Jeff Relf\'s 5-dimensional metric.

Vote

Phineas T Puddleduck 19 years ago

Are you born this stupid, or did you just work really hard at it? I get the feeling it comes quite naturally to you though?

This space reserved for Jeff Relf\'s 5-dimensional metric.

Vote

Paul Hovnanian P.E. 19 years ago

You've got to drain the entropy condenser periodically or it will back up and case the machine to seize.

-- Paul Hovnanian mailto: snipped-for-privacy@Hovnanian.com

------------------------------------------------------------------ All wiyht. Rho sritched mg kegtops awound?

Vote

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required