Hi
I have question. I need remove active RSTDISBL bit attiny2313 in my own parallel programmer (for AT89 - LPT). How understanding it, that one pin attiny2313 appointed as XA1/BS2 (ATtiny2313 Preliminary Complete - Figure 69 - Parallel Programming) appear later as two various signals on Figure 73 (Programming the FUSES Waveforms) ? This refer also BS1/PAGEL pin. I not known how to write procedure canceled this bit - RSTDISBL.
Thank you. Pawel
Hi
I have question. I need remove active RSTDISBL bit attiny2313 in my own parallel programmer (for AT89 - LPT). How understanding it, that one pin attiny2313 appointed as XA1/BS2 (ATtiny2313 Preliminary Complete - Figure 69 - Parallel Programming) appear later as two various signals on Figure 73 (Programming the FUSES Waveforms) ? This refer also BS1/PAGEL pin. I not know how to write procedure canceled this bit - RSTDISBL.
Thank you. Pawel
ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.