I'll bet you have damaged more boards than you will even ever know. You are too goddamned stupid to even grasp the tasks you are performing or the results of 'your version' of those tasks.
I know, for a fact, that you have damaged the plating on several boards, if your only method is the use of a solder sucker.
I think that your lack of grasp of what adding such a port entails proves it to be more difficult than *you* originally perceived. The fact that you were too stupid to know that it was more than simply adding the connector header is quite a tell. Otherwise, you would not have been in here looking for assistance.
Any kid with half a brain would know how to match a neighboring port's populated parts, AFTER detailing the circuit runs with a meter.
Hell, even someone that had never seen it could get the spec online and have a retard like you beat inside an hour, and could likely fill out 20 boards inside of a day, and no that is not your ram it, cram it, and jam it method. That is cleaned, inspected, and run ready.
So what were you having trouble with that you needed help here? You're a pussy. Jump in there! How many MOBOs did you say you had? Get going on one. Jeez!
No, YOU are trying. I have succeeded. Hell, I have SATA hot swappable peripheral drives that were easier to implement than the hell you are putting yourself through. By the time you are done, you could put an NAS box on the net, and all your MOBOs suddenly no longer need your stupid retro-fit.
I sure hope you are not drawing a salary for sitting there with your thumb up your ass wondering about buying parts to add an SATA port to a MOBO.
My god, how retarded can your employer be?!!! I have farts floating around the room with more brains than you have.
No you don't. You would be put in prison for assualt if you did.
No. Just access to a few very good ones.
A good engineer would not make such rash pronouncments before knowing all the facts.
They are all certified (5 day test once a year) and have some kind of sticker at their station.
You are such a "One-trick-pony" A real engineer would have a more creative mind than only being able to come to usenet and deliver one- dimensional insults. A real engineer would be able to slice his opposition with a surgical knife. You use a dull hatchet.
You can type this with a straight face? You call people f&*k-tards every other sentence? what a hoot you are!
No you don't. You would be in prison for asualt if you did that. And certainly be out of work.
There you go again.. Mr. One dimensional!
Great Insult! Try going into the complex plane for a few insults though - ok?
You wouldn't see it coming, and the only evidence of the event you would have are your bruises. I would walk in, greeting everyone the next day, as normal. You would likely not report the places I'd bruise you. Also...
You were almost getting off the x-axis. But the gravitational pull is just too great for you to break free of the x-axis (You do remeber x- axis from junior high math? if not I can explain to you)
You're the one that said 'Only the best engineers can have an attitude..." Can you really be so retarded that you forgot? I even quoted it!
Is there any space left past that 2.5 inch thick skull where some brain matter might be in active use? Grow the f*ck up already, Mr pussy boy assessment twit.
What? You don't smack anybody around, you just troll like a spoiled child. Did it ever occur to you that when you write something meant for others to read, if nobody has their head up your ass as far as you do, that the intended effect just isn't there at all?
ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here.
All logos and trade names are the property of their respective owners.