What component ?

Jul 10, 2005 9 Replies

Hello all, my car is a Merceder Benz vito -99, which has a CDI type of motor with Bosch-Engine management system (EMS). This EMS has now one component which is making a whirring sound every day when the temperature is high. The picture of that component can be found from this page:

formatting link
The page contains link for small picture (100kt), where component is marked with red rectangle. From the big picture (600kt), the codes can be seen if picture is zoomed in.



Every information about this component is very welcome! It is quite easy to replace it, as it is soldered from 4 pins which are clearly visible in the other side of the PCB.



My best quess is that component is relay or coil, but no confidence as couldn't find component from the web.



Best Regards,



+Tuomas

It seems to me it is 15u ( 15 microfarad ) capacitor.

Regards Cyrus

"Cyrus" schreef in bericht news:Wv7Ae.8078$Eo.3640@fed1read04...

With four pins? I doubt it, although I admit 15u seems to say so.

Besides, *if* it is a relay, it may not be the relay that is faulty but the control signal.

Anyone recognizes the logo? A search by manufacturer may be helpful.

petrus bitbyter

It's a relay and if it's buzzing you have a problem - probably not the relay.

N

"petrus bitbyter" a écrit dans le message de news:42d13ffc$0$20934$ snipped-for-privacy@reader1.nntp.hccnet.nl...

the

It definitively is a 15uF /100V capacitor. I have a 1.5u-250V of the same manufacturer and series at hand.

SM stands for Siemens Matsushita, which I believe is now

formatting link
.

Thanks, Fred.

Thanks Fred! that was a good tip and the component indeed is a capasitor and the general description of that component can be found from here:

formatting link

Now it is time to start thinking why component is making a whirring (or ticking) sound

Any guesses? Best Regards,

+Tuomas

The extra pins are possibly for strength and stability of the component, perhaps?

Tom

These are MKT(polyester) capacitor packages developed by EPCOS (Siemens-Matsushita) for Bosch.

formatting link

Unfortunately a catalog page refering to a type B26685 15uF, 100Vdc, boxed, four-terminal film capacitor doesn't seem to be available on the EPCOS website.

Due to the physical size and the pulse application of the part, the occurance of audible noise, particularly in hotter environments, may be normal.

RL

Yes, most possibly. with 4 pins the component stands very stable compared to 2 pins. Also there is more metal to flow the current. The compnent is very simple and the 2 pins in the other end of the component are plus and the 2 pins in the other end are groud

But it's buzzing? That can't be good.

N

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required