Digital clock need!

Hello all. I am new to the world of digital electronics, I would like to build a digital clock HH:MM:SS with 16F84PIC on 7 segment LED, I need circuit diagram, software and processing explanation.

Thanks!

Reply to
hiroc13
Loading thread data ...

Here are a few links that may help you.

formatting link

formatting link

Good luck. I built one with huge 7 inch LED displays. After I plugged it in and the digits started counting, I was so proud of myself. That clock is now my pride and joy. I show it off every chance I get. Hope you'll be just as proud of your project.

Reply to
Elephant

a écrit dans le message de news: snipped-for-privacy@z14g2000cwz.googlegroups.com...

Hello, I hope this may help :

formatting link

Bruno

Reply to
BrunoG

OMG, check out those prices like $49.99 for a little clock kit! Alot of that stuff looks very high priced to me..............

Reply to
James Douglas

The PIC16F84 has been replaced with the PIC16F628. There is a digital clock program and schematic using the PIC16F628 at:

formatting link

-Bill

Reply to
Bill Bowden

wrote

There are a number of ways you can accomplish this task. You need to tell us more about your requirements. For example, do you need battery operation or would AC power be ok? How much accuracy do you need? Do you need it to set itself?

BTW, the 16F84 is getting kinda old, the 16F628 or 16F88 might be of interest to you as they are cheaper and have more features.

Here is a good place for some PIC info:

formatting link
and another really good one:
formatting link

Reply to
Anthony Fremont
12V is battery, I need to set it and accuracy may be +(-) 1sec /10 days
Reply to
hiroc

LEDs and batteries are a poor mix. Even if running 1 mA/segment, it will drain the battery pretty fast -- and be pretty dim. LCD is better for batteries. If it MUST be LED, running off the power company would easily provide the accuracy by simply counting the cycles of the AC. Mine runs great and certainly meets the accuracy spec.

GG

Reply to
stratus46

days

That is about 1ppm (part per million) accuracy. The only way that I know to achieve that sort of accuracy is to use either a GPS module or a reference to WWV. Most crystals will only give you a accuracy between

20-50ppm.
Reply to
Anthony Fremont

The DS4000 TCXO does 1ppm

formatting link

Dave :)

Reply to
David L. Jones

The DS32KHz is cheaper and almost as good and comes in SO package:

formatting link
This is the one I meant in the first place, sorry, I thought they had changed the part number or something.

Dave :)

Reply to
David L. Jones

or a

between

Well looky there. Only $18 in thousand lots. ;-) Still cheaper and more convenient (not counting that BGA packaging) than a GPS module, pretty slick.

Reply to
Anthony Fremont

ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.