My Thomson 28" television has failed to start up after coming back from holiday. Model is 28WF25U.
Standby light comes on then flashes amber 3 times then red twice followed by 7 red flashes. This repeats for three times then the standby button stays on and the TV will not respond.
Is this a repairable fault or is it time to upgrade?
Thanks in advance for any help.
Jim
--
Remove `spamtrapped` to reply off-list
http://jim-mason.fotopic.net/c162491.html
::::Jim Mason:::: wrote in ::::news: snipped-for-privacy@news.individual.net:
Is this the ICC17 chassis? If so,
Thomson TV Model: (ICC17 Chassis) Standby led fault codes and meanings list / standby led flashes then pauses Code meanings are as follows: 10 = child lock mode, 11 = timer mode, 14 = there is no response from Iv01, 15 = there is no response from IS40, 20 = bus access prohibited by software, 21 = bus data line held low, 23 = bus clock line held low, 25 = switched 5v supply missing, 26 = crt is not warming in the allotted time, 27 = deflection failure more than three times, 28 = IF01 guard voltage (pin 8) exceeded, 34 = no response from the nvm chip IR03, 36 = incorrect address passed to bus handler, 37 = unexpected level on NMI line (power fail), 41 = bus data line not recoverable
ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here.
All logos and trade names are the property of their respective owners.