Assuming there is not some 50KW transmitting tower within one mile, what is the ac line voltage reading at your house?
You are allowing the degauss circuit to activate after the unit has been sitting in each new location off for a while.
120.5 vac, +/- about .2 volts.
Yes, and it has had no effect.
I took the monitor to work today, about 10-15 km away, and the problem was present there. I'm going to leave it for now until the tech is back from vacation at the repair shop, and I'm back from my vacation, so it'll be in a couple of weeks. I'll see if I can bring it by the shop again with my laptop and double check that it's not happening there... again. I'll take a UPS with me in the car and run it on battery for the trip over, just in case it happens to magically clear up somewhere on the trip over.
I'll post the results of that adventure when the time comes :)
Thanks for all the replies in the meantime.
Yes, and it does help to a point, but it also makes the screen so blurry (I have to set it to the highest setting) it's not worth using.
ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.