Part Wanted: Pan/Zoom Control

Nov 25, 2005 6 Replies

Can someone please tell me the best way to get my hands on a Pan/Zoom control for a Canon ES800 camcorder?



The control's external plastic housing cracked, requiring me to push down very hard on the control to be able to turn the inner piece (this is probably a detail that none of you really want to know!).



I would hate to have to discard this ten-year old camera just because of this tiny crack ... it has been REPAIR FREE up to this point!



Thanks for any help anyone can give me.



-- Mark



-------------------------------------------------------------- Home Page: http://www.seanet.com/~jasonrnorth

Perhaps look on ebay for an identical camera with some other problem?

Thanks for the suggestions to look at eBAY. I took a look, unfortunately no one is selling this particular camera. I suppose it is possible that the same part is used on several different models - any way to know which ones? Thanks.

-- Mark

Probably by spotting one that looks the same on the outside. If you spot a cam that is the same size and shape, but with different features, it probably has most of the same mechanical parts and switches.

The only difference between models in this case might be simple on-off zoom switches or variable speed depending on how hard you press.

That doesn't surprise me, however if you keep looking every week or so eventually it's not too unlikely one will turn up. You could also check thrift stores, pawn shops and garage sales, that unit is old enough that it may turn up at one of those.

Perhaps you might be able to repair the cracked unit? I've had very good success in the past using cyano acrylate glue on plastic (polybutylstyrene.) housings. Tends to weld most back nearly as good as new. Also called super-glue or crazy-glue.

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required