Loss of red with dominant green tint; some red for about 3" on the left of the screen; red fades moving to the right.
When problem began the color balance was normal for up to 15 minutes from startup before the red faded. Now, no red on startup. All menu color adjustments fail to correct.
Can anyone suggest the diagnosis and fix ?
The performance of the colour amp stages should be properly checked. This is done by using a scope to see if the signal levels are correct, and also using a volt meter check the supply voltages, and bias voltages to the CRT.
Generally speaking, according to your description, a common cause of this type of failure is usually the CRT.
--
JANA _____
When problem began the color balance was normal for up to 15 minutes from startup before the red faded. Now, no red on startup. All menu color adjustments fail to correct.
Can anyone suggest the diagnosis and fix ?
ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.