l am working on these LG GSJ960PZBZ refrigerator (5 of them withe same prob lem)which is showing the error code OF and F. The temperature cannot be set . The compressor does not come on. The small red LED on the control board d oes not come on at all. Please l need help. Thanks
Chuckle. 0F or F means that the fridge is in "display mode" as in "demo mode". Found with Google in about 30 seconds.
-- Jeff Liebermann jeffl@cruzio.com 150 Felker St #D http://www.LearnByDestroying.com Santa Cruz CA 95060 http://802.11junk.com Skype: JeffLiebermann AE6KS 831-336-2558
oblem)which is showing the error code OF and F. The temperature cannot be s et. The compressor does not come on. The small red LED on the control board does not come on at all. Please l need help. Thanks
Thanks please l have done what the site
What site? The site you provided above is useless gibberish. I think you mean this site:
Perhaps one of these other instructions for doing the reset will work better: etc... or even a video:
Keep trying. It should work eventually. If it continues to not reset, have someone else follow the instructions WITHOUT YOUR HELP and see if that works any better. Assumptions, bad timing, fumbling with the buttons, or not hitting and releasing both bottons at exactly the same time, might have an effect.
Also, make sure the refrigerator is plugged in and turned on while doing the reset. Don't laugh, but I had to help an "installer" do the reset once, only to find out that he failed to turn the refrigerator on because the printed instructions didn't tell him to do so.
Good luck.
-- Jeff Liebermann jeffl@cruzio.com 150 Felker St #D http://www.LearnByDestroying.com Santa Cruz CA 95060 http://802.11junk.com Skype: JeffLiebermann AE6KS 831-336-2558
ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.