I have gotten a food grinder/juicer for a few years. Recently, the juice that I'm getting out of the machine has gotten coarser. I'm not sure if it's the grinding stone that has become dull, or whether it's time to get a replacement motor. The picture shows the motor that the machine is using
formatting link
I basically would like some information on how to read the label so that I can find a suitable replacement motor.
Thanks.
Didn't find your answer? Ask the community — no account required.
F
Franc Zabkar
On Tue, 18 Nov 2008 10:58:55 -0800 (PST), ssylee put finger to keyboard and composed:
That's a capacitor, not a motor.
- Franc Zabkar
Please remove one \'i\' from my address when replying by email.
S
ssylee
The label is for the capacitor, not the motor?
S
Sjouke Burry
Thats no motor label. Its a capacitor (12uF,300V)
F
Franc Zabkar
On Tue, 18 Nov 2008 12:59:02 -0800 (PST), ssylee put finger to keyboard and composed:
Yes. Its capacitance is 12uF.
Here's an example of a motor capacitor:
formatting link
- Franc Zabkar
Please remove one \'i\' from my address when replying by email.
S
ssylee
com/CBB61-6.htm
Basically, what specifications would I need to obtain in order to get a replacement motor?
W
William Sommerwerck
Have you contacted the manufacturer or importer?
S
Samuel M. Goldwasser
capacitor:
formatting link
Does the motor sound like it's not running at the normal speed? With a capacitor, it means the motor is an induction motor. They are basically single speed motors tied to the AC line frequency.sg
-- sam | Sci.Electronics.Repair FAQ:
formatting link
Repair | Main Table of Contents:
formatting link
+Lasers | Sam's Laser FAQ:
formatting link
| Mirror Sites:
formatting link
Important: Anything sent to the email address in the message header above is ignored unless my full name AND either lasers or electronics is included in the subject line. Or, you can contact me via the Feedback Form in the FAQs.
S
ssylee
e:
e
not
it's
the
ike
rer.com/CBB61-6.htm
tml
is
in the
.
The motor sounds like it's not running at normal speed. I guess I can check where I can get a replacement induction motor according to the power specifications. Thank you all for the advice.
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required
Report Content
You are reporting this content to the moderators. They will look at it
ASAP.