I have a Fluke Scopemeter 99B. The MOVE Button will not move screen to the Left, but will move it right. I removed from the case and cleaned the pads and buttons which did not fix it. This makes it impossible to review a recorded waveform. I have a friend with the same issue in his 99B. Is there a fix? Is there a Service Manual for the 99B?? email me after removing remove davidjmessing remove @gmail.com
Fluke Scopemeter 99B MOVE Button No Left, Right OK
Sep 08, 2009
1 Replies
screen to the
cleaned the pads
review a
99B. Isafter
the first entry on a *yahoo* search showed a good hit regarding "keypad foil" problems with 99B
the fix, which i have done similarly in an old Tek digital scope, uses a conductive paint/pen to seal cracks in the flexible/membrane/foil traces that connects the button pads to the circuits.
follow button trace look for open/cracked/worn path
hth robb
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required