Do the remote codes match for various universal remotes

Do the remote codes match for various universal remotes?

I have several brands of universal tv, vcr, dvd etc. remotes. For some I have the list of codes, and for some I don't. Do they usually have the same codes from brand to brand?

I know I could just compare two lists, or every list I have, but I still wouldn't know about the others, and I thought someone might know the answer right off the bat. Thanks.

Reply to
mm
Loading thread data ...

formatting link

LIRC is a package that allows you to decode and send infra-red signals of many (but not all) commonly used remote controls.

Former versions focussed on home-brew hardware connected to the serial or parallel port. Descriptions how to build this hardware can be found here. Current versions of LIRC also support a variety of other hardware. An up-to-date list of all supported devices and the status of the according drivers is available on the left.

The most important part of LIRC is the lircd daemon that will decode IR signals received by the device drivers and provide the information on a socket. It will also accept commands for IR signals to be sent if the hardware supports this. The second daemon program called lircmd will connect to lircd and translate the decoded IR signals to mouse movements. You can e.g. configure X to use your remote control as an input device.

The user space applications will allow you to control your computer with your remote control. You can send X events to applications, start programs and much more on just one button press. The possible applications are obvious: Infra-red mouse, remote control for your TV tuner card or CD-ROM, shutdown by remote, program your VCR and/or satellite tuner with your computer, etc. I've heard that MP3 players are also quite popular these days.

Reply to
Homer J Simpson

NO they don't. Rather than asking a newsgroup why don't you go to

formatting link
to get more information. Are you talking about the numbers you enter a pre-programmed remote so it will control a device, or are you talking about the IR codes that are transmitted to the device in order to control it. Neither are common between different brands.

Reply to
EXT

Yes, this one. I look in a chart for my brand of tv, and it gives one or more usually three digit numbers that I enter. If I get the right three numbers, it now works as a remote for that tv.

I knew there were such codes, but wouldn't know what to do with them. Well, after reading Homer's post, I guess I do know something to do with them!

Exactly what I wanted to know. Thank, and thanks Homer. I will get better organized on the lists I have, and I'll keep my eyes out for other lists if I see them.

(I didn't collect this stuff until I got a Magnavox tv at a yard sale that ended up requiring 3 remotes to control all the functions. I have a learning-remote, and I was going to teach all 3 sets of commands, but a year later I got a single Magnavox remote at a hamfest that did everything the 3 did. Now I'm interested in all this stuff._)

If you are inclined to email me for some reason, remove NOPSAM :-)

Reply to
mm

formatting link

Reply to
RLM

Thanks and thanks to all.

Reply to
mm

ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.