Hello Again Guys, Thanks for all your advice on servicing my RPTV. I'm still not out of the woods with it yet and would appreciate some further input if anyone could offer any. Let me first review the situation so far. The set functioned well for around 5 years with no problems. I turned it on one night and it shut itself back off. It flashed error code 22 on the front LED. On the advice of a service tech, I replaced the convergence IC's (Sanyo STK392-110) and D522 (NTE506). The set now turns on, but the convergence is way out of adjustment and there is a pretty bad pincushion effect. I can not seem to adjust the convergence via the user menus, and the picture is seriously bowed on all 4 sides. I had heard that resetting the values in the service menu can seriously screw up the picture. Though I did not manually do this, I wondered if working on the set could have somehow reset these values. Or perhaps my new STK's are defective, or perhaps something else is broken in the set, or perhaps, well I dunno what??? My Jenna Jameson DVD awaits, can't someone help??? Any assistance is greatly appreciated. Thanks Much Guys!
- posted
18 years ago