1. Home
  2. Electronics Repair
  3. Component NSKE 115 .1+120 ohm 350 VAC NISSEI E

Component NSKE 115 .1+120 ohm 350 VAC NISSEI E

There is a photo of a p.c.b. here.

formatting link
The board is from a Tissue-Tek III made by Sakura Fine Technical Co., Ltd., Tokyo. Judging from the number on the Intersil microprocessor, the machine was built in the early 1980s.

Can anyone tell me what the five rust colored components are along the top of the board? The plastic case is round on one end and square on the other end. Four of them are adjacent to the triacs attached to aluminum cooling extrusions. These are the markings. NSKE 115 .1+120 ohm 350 VAC NISSEI E

From the packaging, I'd guess capacitors but the 120 ohm marking seems odd. Web pages citing Nissei Electric Company exist but a matching part didn't surface.

Thanks for any ideas, ... Peter E.

Reply to
Peter
Loading thread data ...

Snubber network, O.1uF plus 120 Ohm in series? JC

Reply to
Archon

Yes, absolutely agree. Snubber network comprising 0.1uF cap in series with

120 ohm R, all in the same case. I have some of these somewhere, tucked away in a dusty corner of the workshop, which are encapsulated in a clear yellowish resin, a bit like amber, and you can clearly see both components soldered together.

Arfa

Reply to
Arfa Daily

Another agree, and they are very common.

Reply to
PeterD

ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.