cnet 5614XE external fax modem need info

There's a realistic chance that if you get out a magnifying glass and hold the unit at an angle to the light, that you'll see, in teensy raised print, the numbers you're looking for.

Look inside and and follow the power from the connector. First, the center pin should go to the supply bits, not to ground. That shows the center pin is + or -.

Then see what they're using for a regulator. The input will have to be more than that.

Does it have a bridge rectifier? If so the supply was probably AC, but you can use a DC supply with it.

Lastly, first try a +5 v supply, if that doesn't work, then try a

The internet is your friend. You might also try contacting CNet.

Peter Wieck Melrose Park, PA

No joy, just says POWER.

Submit a question. Can't hurt, might help. Otherwise, back into what is needed as others have advised.

Peter Wieck Melrose Park, PA

Been there. Not the same model, and no DC voltage spec anyway. I have not found a way to contact CNET. All I get are recordings having to do with news; nothing about products. I think they left that business some time ago.

Thanks; I have submitted a question.

Here is the reply:

Hello,

Thank you for contacting us and sorry for reply you so late.

Please be informed CNet 5614XE this product has been phased out for a long time, and we didn't find its spec information in our database, so we are sorry that we can't help you on this issue.

Again, we are sorry for the inconvenience made and please don't hesitate to contact us if any other questions. Thank you.

Best regards,

CNet support