10 discussions on ElectronDepot about the HP HP4195A: what owners asked, what went wrong, and what fixed it.
Hallo zusammen,wir verwenden in der Fa. noch einen älteren HP4195A Analyzer als"Komponententester" mit dem 41951A Impedanzadapter.Gestern ging das Grundgerät noch, heute beim Einschalten blieb allesdunkel, nur die Lüfter laufen und die...
Here's a bad pic of an HP302, a "wave analyzer", which is basically atuned voltmeter. I don't think anybody makes anything like this anymore.-- John Larkin Highland Technology Inc jlarkin at highlandtechnology dot com ...
I am writing a program to control a 4195 over the HP-IB bus,and I can't seem to find the command to return the data froma sweep. I have worked with many other HP test instruments,and usually there is a command that sends back the entire...
I am trying to determine what the dwell time is for these instruments.By dwell time I mean the amount of time it samples the signal for eachdata point. This does not appear to be a configurable value, nor doesthere seem to be a way to query...
I've been making my noise floor measurements with a rented HP3588spectrum analyzer and a differrential probe. I've had to return thatequipment. The company owns an HP4195A which I've tried to use with aFET probe with no success. With the...
Hello,I've got an old HP4195A network analyzer. It writes data to it's 3-1/4" floppy in a LIF format. This format is unreadable via DOS.I've surfed the net and tried numerous program dedicated to this conversion but have had no luck. ...