Do you have a question? Post it now! No Registration Necessary
- Michael Lodman
July 29, 2003, 5:49 pm
rate this thread
I have Redboot booting Linux on an Intel IXP425 based system.
I have just added a second 16M flash chip, for a total of 32M.
When I type the Linux "reboot" command it corrupts the Redboot
configuration. The flash regions do not overlap. When I power cycle it does
not corrupt the Redboot config.
- » Crosscompiling for ARM: reloc type R_ARM_ABS32 is not supported for PIC - ...
- — Newest thread in » Embedded Linux