build or compile rootfs from box A

Dear All

I am a rookie to Linux. I have two units of two-way Linux router Boxes {Platform: iDirect iDS Platform (XScale)}

BOX "A" is ok. No problems. While BOX "B" had some errors so I had a thought to format the flash

I init the BOX B by using the command

"fis init"

I noticed that these below entries are missing (Linux and RootFS) on BOX B Redboot>Fis list Name FLASH addr Mem addr Length Entry point RedBoot 0x50000000 0x50000000 0x00040000 0x00000000 FIS directory 0x50FE0000 0x50FE0000 0x0001F000 0x00000000 RedBoot config 0x50FFF000 0x50FFF000 0x00001000 0x00000000

Missing (Linux and RootFS) Linux 0x50060000 0x01600000 0x00100000 0x01600000 RootFS 0x50160000 0x50160000 0x00E80000 0x01600000

I got this from BOX A

Redboot>Fis list Name FLASH addr Mem addr Length Entry point RedBoot 0x50000000 0x50000000 0x00040000 0x00000000 Linux 0x50060000 0x01600000 0x00100000 0x01600000 RootFS 0x50160000 0x50160000 0x00E80000 0x01600000 FIS directory 0x50FE0000 0x50FE0000 0x0001F000 0x00000000 RedBoot config 0x50FFF000 0x50FFF000 0x00001000 0x00000000

>>>>>>>>>>>>>>>>>>>>>>>>>
Reply to
n57green
Loading thread data ...

ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.