Thank You for your help on a crystal problem.

I would like to tank you for help on this poblem with crystals and on how to build these simple resonators. to get the tuned frequency output. I have managed to perchase 32768 KHZ watch crystals from electronsonic with wire leads from Fox type NC38 with long leads.

The reson I was looking for precisely 64 HZ because my older project... "The Binford 6000" Light controller for you that grow "five Leaf" Tomatos It was a stupid idea that I wanted to see if power line clocking can be aplied with little cost. It worked quite well but their was to add-on's I wanted to put in was auto battery switch over and continued clocking with lose of primary A.C clocking so I have set up the watch crystal 32768 divided by 512 using a

14060 (14 stage binary ripple counter). Thank you Bill Bowdon for your help on this one. The 64 Hz was to solve the timing error I have discovered when I completed the project. The web site is below. Yes my battery charger has a current sencing float charge that keeps my 12 2.2AH battery at 12.94 volts indefently. My 12 volt output drop to 11.25 volts but this is not critical because the main relays are solid state.

-- My Cat Tigger says every morning... Before my morning coffee I might as well be a DOG! Swap "_" between travel and net "-" When responding http://www,travel-net.com/~swiper

Reply to
Scott Wiper
Loading thread data ...

ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.