Hi all!
I've got some EEPROMS called: HN48016P and ER5901 (both have 2k x 8 Bit memory) Unfortunately I coldn't find any pinouts nor timing-diagrams of theese EEPROMS! The only thing I found out, was: the HN4801P is supposed to have the same pinout like the 28c16 or 27c16 (but i don't think, there exists a
I even tried to connect it as given from the 28c16 but it didn't work :-(
would be great if anyone could help me!
thanks Tobi
5911 Serial 128x8/64x16 EEPROM. +----------+ CD | +--+ 8| VCC CLK |2 7| RDY//BSY DI |3 5911 6| x16//x8 DO |4 5| GND +----------+
it's 4 wire, microwire device try looking up 59C11 on the microchip website.
Wayne
Well, but my ER5901 has 24 pins. So, I don't think it's a serial EEPROM :-(
Intel made 2716 eproms. Presumably the 27c16 is similar.
Take a look here:
and
They're over 20 years old, and any programming algorithm for anything newer is bound to fail.
I couldn't find a Hitachi datasheet, but I did find a General Instrument ER5716 that claims "pin compatiblity". Prelimary Information, Your milage may vary. (out of the 1982 IC Master).
ftp://ftp.eskimo.com/u/m/mzenier/ER5716.pdf
Mark Zenier snipped-for-privacy@eskimo.com Washington State resident
Have something to add? Share your thoughts — no account required.
Ask the community — no account required