No output while booting ML403 board

Anyone,

When I try to boot linux on a Xlinx ML403 board I get the following out put:

loaded at: 00400000 004FA1A0 board data at: 00000000 0000007C relocated to: 0040405C 004040D8 zimage at: 00404FE5 004F7A9B avail ram: 004FB000 7C9E2378

Linux/PPC load: console=ttyS0,9600 ip=on root=/dev/xsysace2 rw Uncompressing Linux...done. Now booting the kernel

Does the 'board data at' arguments look ok. Any help would be appriated!!!

Reply to
gseegmiller
Loading thread data ...

Avail ram is definitely wrong. Try to add mem=0x4000000 to the kernel boot command line and see if that gets you any further.

- Peter

snipped-for-privacy@gmail.com wrote:

Reply to
Peter Ryser

Thanks for responing!!!

I have set memory to 0x04000000. The 'avail ram' is calculated using the end of used memory '004FB000' plus the size of the 'board data'. The 'board data' size is very large, something like 7C??????.

Thanks again!!!

Reply to
gseegmiller

ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.