I wanted to know which particular software from altera give support, in terms of synthesis, P&R and downloading to this chip. Is the ALTERA Max + Plus II suitable to program those chip?
And also, it seems that the 10K50E part is an obsolete part that has been replaced by the 10K50S. Is there any difference between them, in terms of implementation and bitstream compatibility?
Thanks for any help! happy holidays
I've not used these parts for a while but I remember one or two things. Max+Plus II supports all 10K series (A,B,E,S...). For 10K50E I think you need a full version of Max+Plus II (the free web version only supports upto
10K30). For the programming files, you'll need to compile the design again for 10K50S.Best Regards Arash
Hi Jacques,
Max + Plus II will work with the 10K family. So will Altera's newer CAD system, Quartus. Quartus is more powerful and supports all Altera's newer families, and achieves better fitting & speed for the
10K family than Max + Plus II does, on average. Also, Max + Plus II is not really being extended anymore -- it is an older CAD system we support for customers who are used to it, but it is not being enhanced in significant ways anymore.So I would recommend you use Quartus.
Vaughn
Have something to add? Share your thoughts — no account required.
Ask the community — no account required