Hi!
A while back sombody posted about problems with his Xilinx USB cable It took some time to get it working, there are several issues. see:
formatting link
for a complete install-howto
This is just the part I added:
Trouble shooting the ds300 and XUP-V2P usb-interface
Not all of these steps are needed:
- Run "bash /bin/lin/setup_pcusb" as root to install the USB drivers * Install fxload in /sbin see: formatting link* Put the absolute path to the firmware: /etc/hotplug/usb/xusbdfwu.fw/xusbdfwu.hex in /etc/hotplug/usb/xusbdfwu * chmod 666 /dev/ttyUS*
HTH Groetjes, Stefan