Embedded Programming

  1. Home
  2. Embedded Programming
16393 Threads Posts
to

Worth reading in Embedded Programming

Emulating a processor

Hi all, I'm interested to understand the processor architecture in depth. So i decided on emulating the processor itsel...
31 comments posted 20yrs
posted by osIndgy
31 comments posted 20yrs posted by osIndgy

route default gw during startup

How do I run route during startup, even when it logs in as a user? Currently it says "SIOCADDRT: Operation not permitted...
6 comments posted 20yrs
posted by anvilsoup
6 comments posted 20yrs posted by anvilsoup

URGENT RESOLUTION! please:(:(

somebody helps me? if yes answer!! please!!
0 comments posted 20yrs
posted by sexnografo
0 comments posted 20yrs posted by sexnografo

ImageCraft ICCAVR compile error in eeprom.h

using: ImageCraft IDE v6.31 - ATMega64 One of the standard include files is "eeprom.h", included below. I am getting a...
1 comments posted 20yrs
posted by scottk
1 comments posted 20yrs posted by scottk

RTEMS on LEON

Can any one tell me how to develop device driver in RTEMS with LEON2 BSP? What is the debugging process, debugger? My Ta...
3 comments posted 20yrs
posted by noah538
3 comments posted 20yrs posted by noah538

Micro with USB 2.0 HI-SPEED

I'm looking for a microcontroller with a slave USB interface. There are lots available in the flavors I like. However,...
3 comments posted 20yrs
posted by andrew.queisser at hp com
3 comments posted 20yrs posted by andrew.queisser at hp com

Which LCD is this?

I have an LCD here the size of a PDA screen 2" x 3" that I bought from a surplus store. I cannot find any mention of it...
5 comments posted 20yrs
posted by ghazan.haider
5 comments posted 20yrs posted by ghazan.haider

ADC problems with TI DSP280x

In Example_280xAdcSeqModeTest.c for the TMS320F2808 DSP i wonder what the following assembler command is for: asm(" RPT...
4 comments posted 20yrs
posted by moppe
4 comments posted 20yrs posted by moppe

F12X and srf08

Anyone has work with srf08 using cygnal F12X ? Need some help. I am need to both the up and the i2C Thank you
0 comments posted 20yrs
posted by Edwin.Foo
0 comments posted 20yrs posted by Edwin.Foo

PIC PSP port bus contention

Hi We're trying to interface a PIC micro to an 8052 micro using the Parallel Slave Port on the PIC. The 8052 can read b...
6 comments posted 20yrs
posted by darkknight.21
6 comments posted 20yrs posted by darkknight.21

Persistent stall in the Cypress FX2 FIFO

Hi all, I am using the Cypress FX2 to interface an FPGA to a PC via an USB2.0 link. The FX2 was configured to provide 4...
4 comments posted 20yrs
posted by stevenson
4 comments posted 20yrs posted by stevenson

BittWare’s PCI+ PMC+DMA TRANSFER

Hi ALL I would like your tips and help regarding my work. I would be thankful for your help, would some how return it i...
0 comments posted 20yrs
posted by p.manohar.reddy
0 comments posted 20yrs posted by p.manohar.reddy

R8C/Tiny flash re-programming limits

Hello Newsgroup, In the data sheets of the Renesas R8C controllers some versions are listed with lower re-programming c...
9 comments posted 20yrs
posted by notthisjoergsch
9 comments posted 20yrs posted by notthisjoergsch

help with choosing parts for project

I'm looking to design and develop a remote controlled motor. The way i want to implement is to have a RF transmitter ch...
3 comments posted 20yrs
posted by gtg680m
3 comments posted 20yrs posted by gtg680m