Embedded Programming

any PIC suggestions- Magnetic Stripe Reader

I am trying to build a magnetic stripe reader for my design project. basically I will obtain two signals (data + clock)...

3 comments posted 23yrs

posted by mesolmaz

3 comments posted 23yrs posted by mesolmaz

AT91 USART configuration

Hi, I am having problems setting up the USART on an AT91FR40162. The AT91FR40162 is an AT91R4008 integrated with a 2MBy...

2 comments posted 23yrs

posted by clivel

2 comments posted 23yrs posted by clivel

Re: Looking for LCD display with serial interface.

Try http://www.earthlcd.com/serial_lcd.htm -Z > Hi, > > Can anybody recommend a manufacturer of LCD displays with some...

19 comments posted 23yrs

posted by ZO

19 comments posted 23yrs posted by ZO

Re: Logging 2 million samples a second for 15 minutes

> > I have an instrument in mind that would need to log 8-bit ADC readings > at 2MHz for around 15 minutes. That comes...

15 comments posted 23yrs

posted by jpopelish

15 comments posted 23yrs posted by jpopelish

EDK- - - XMD: Can't establish connection with Stub

Hi all, I am using GDB to debug my design. First I generated XMDSTUB and dumped bit file on FPGA. Then I started XMD en...

0 comments posted 23yrs

posted by parikhviral

0 comments posted 23yrs posted by parikhviral

flashing hitachi sh7055

hello i would like to make a program (on chip) for erase a memory block or for reprogram a memory block. for erasing bl...

0 comments posted 23yrs

posted by double.bidonN

0 comments posted 23yrs posted by double.bidonN

Unknown Chip?

Anyone recognize a HT445B6 device, has 48 pins and is DIL. Must be a microcontroller with LCD but I can't find where to...

1 comments posted 23yrs

posted by phil

1 comments posted 23yrs posted by phil

rebooting pc from prot mode

Hello, I have an os running on a pc in prot mode. I am trying to reboot the pc without using the bios. How does one go a...

1 comments posted 23yrs

posted by misc

1 comments posted 23yrs posted by misc

ethernet connectivity

Hello all I am looking for a cheap way to connect a PIC to an ethernet network. I've thus far considered: 1. The rabbit...

7 comments posted 23yrs

posted by ruse

7 comments posted 23yrs posted by ruse

Re: irq handler question

>If so what modifiers/specifiers do I need to be > using if the calling function and the handler are in 2 different phy...

0 comments posted 23yrs

posted by h2vic

0 comments posted 23yrs posted by h2vic

which pthread library to use for UNC20

Hello, I've just started developing with the UNC20. A number of pthread libraries are provided. I tried a few at random...

0 comments posted 23yrs

posted by michael

0 comments posted 23yrs posted by michael

rebooting an i386 pc

Hello, I have a protected mode os running on a pc. I need to reboot the pc without using the bios. How do I go about thi...

4 comments posted 23yrs

posted by misc

4 comments posted 23yrs posted by misc

Serial port through dos window

Hi I'm doing serial transfers to an external system from a PC. I'm able to run without errors when I boot a straight DO...

4 comments posted 23yrs

posted by dkelvey

4 comments posted 23yrs posted by dkelvey

640x480 VGA LCD monitor

I have an old embedded PC that produces 640x480 VGA output. I'd like to replace the CRT monitor with an LCD. The proble...

1 comments posted 23yrs

posted by chuck

1 comments posted 23yrs posted by chuck

rs485 over power

I'm trying to communicate between multiple devices and I only want to run 2 wires between devices. I want the 2 wires t...

17 comments posted 23yrs

posted by jhendrix

17 comments posted 23yrs posted by jhendrix