1. Home
  2. Embedded Programming
  3. problem in receiving data from GSM module to 8051 microcontroller

problem in receiving data from GSM module to 8051 microcontroller

Hi, I am doing a project using 8051 and GSM module,SIM900B. I am using a 8051 microcontroller to send AT commands to GSM module and store the data in an array and send the stored data as a text message to a mobile . I am able to see both gsm module and microcontroller unit working perfectly when connected to computer seperately through serial cable,but when I am connecting both the devices with the help of a cross over cable, I am able to send sms using microcontroller and GSM module but unable to receive any data.I am using a MAX 232 on microcontroller board and SIM300_EVB_V2.02 for placing the GSM module SIM900B.

expecting a reply at the earliest.

Thanks & Regards, kamalesh.

--------------------------------------- Posted through

formatting link

Reply to
kamalesh
Loading thread data ...

Go to

formatting link
and post your question on the forums there. Ask for Erik Malund, he knows everything. Hans

--- news://freenews.netfront.net/ - complaints: snipped-for-privacy@netfront.net ---

Reply to
Hans Heinz

In message , kamalesh writes

Your serial cable is incorrectly wired.

--
\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\
\/\/\/\/\ Chris Hills  Staffs  England     /\/\/\/\/
\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/
Reply to
Chris H

ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.