Hi Leute, bei vielen diskreten Bauteilen von Nexperia ist in der Bestellnummer hintendran noch ne 115 dabei. z.B. hier:
Unter "orderable part number" schauen.
Hat jemand ne Ahnung, was das bedeutet?
-- Michael
Am 21.10.2021 um 09:40 schrieb Michael S.:
12NC PackingType Packing Type Description 002 NO MARKING * IC'S TUBE - DSC BULK PACK 005 NO MARKING * CHIPS ON WAFER, PRE-SAWN, ON FFC 006 NO MARKING * CHIPS ON WAFER, UNSAWN, ON FFC 013 STANDARD MARKING * REEL PACK 13",180 DEGREE TURNED 015 NO MARKING * WAFER, NOT MEASURED, DEL AS WAFER 023 STANDARD MARKING*CIRCUIT ELEMENT PACKED ON REEL 7" 024 NO MARKING*CHIPS ON WAFER,PRE-SAWN,IN PLASTIC JARS 025 NO MARKING*CHIPS ON WAFER, UN-SAWN, ELECTR TESTED 026 NO MARKING * DIE IN WAFFLE CARRIERS 027 NO MARKING * CIRCUIT ELEMENT PACKED ON REEL7" 028 NO MARKING * DIE IN SINGLE WAFFLE CARRIERS 029 NO MARKING * DIE, MOUNTED ON PUNCHED TAPE 111 STANDARD MARKING * TRAY PACK, SINGLE 112 STANDARD MARKING * IC'S TUBE - DSC BULK PACK 113 STANDARD MARKING * REEL PACK,AXIAL,STANDARD,52MM 114 STANDARD MARKING * TRADE PACK 115 STANDARD MARKING * REEL PACK, SMD, 7" 116 STANDARD MARKING * REEL PACK, 48MM WIDE, 400MM DIA 117 STANDARD MARKING * TRAY PACK, MULTIPLE 118 STANDARD MARKING * REEL PACK, SMD, 13" 122 STANDARD MARKING * STICK & COINS 125 STANDARD MARKING * REEL PACK, REVERSE 126 STANDARD MARKING * AMMOPACK, RADIAL 127 STANDARD MARKING * HORIZONTAL, RAIL PACK 128 STANDARD MARKING * REEL PACK, SMD, 13", TURNED 129 STANDARD MARKING * TUBE SMALL 132 STANDARD MARKING * REEL PACK, SMD, 7 133 STANDARD MARKING * AMMOPACK, AXIAL, 52M 134 STANDARD MARKING * REEL PACK, SMD, 13" LARGE PQ 135 STANDARD MARKING * REEL PACK, SMD, LARGE 143 STANDARD MARKING * AMMOPACK, AXIAL, 26MM 151 STANDARD MARKING * TRAY PACK, BAKEABLE, SINGLETilmann
Am 21.10.2021 um 09:45 schrieb Tilmann Reh:
Wow, das ging schnell, danke!
-- Michael
ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.