Ciao, sto usando un max412 come semplice comparatore. Alimentando con 5Volt stabilizzati , in uscita ottendo 0.99 per il livello basso e 4.3 per il livello alto.
Volevo usare questa uscita per entrare direttamente in una porta di un
16F88, ma non mi sembra di essere nei limiti dei parametri caratteristici (pag 177 del manuale), o mi sbaglio ?
DC CHARACTERISTICS VIL Input Low Voltage D030 with TTL buffer VSS =E2=80=94 0.15 VDD V For entire VDD range D030A VSS =E2=80=94 0.8V V 4.5V =E2=89=A4 VDD =E2=89=A4 5.5V D031 with Schmitt Trigger buffer VSS =E2=80=94 0.2 VDD V D032 MCLR, OSC1 (in RC mode) VSS =E2=80=94 0.2 VDD V (Note 1) D033 OSC1 (in XT and LP mode) VSS =E2=80=94 0.3V V OSC1 (in HS mode) VSS =E2=80=94 0.3 VDD V Ports RB1 and RB4: D034 with Schmitt Trigger buffer VSS =E2=80=94 0.3 VDD V For entire VDD ran= ge
VIH Input High Voltage I/O ports: D040 with TTL buffer 2.0 =E2=80=94 VDD V 4.5V =E2=89=A4 VDD =E2=89=A4 5.5V D040A 0.25 VDD + 0.8V =E2=80=94 VDD V For entire VDD range D041 with Schmitt Trigger buffer 0.8 VDD =E2=80=94 VDD V For entire VDD ran= ge D042 MCLR 0.8 VDD =E2=80=94 VDD V D042A OSC1 (in XT and LP mode) 1.6V =E2=80=94 VDD V OSC1 (in HS mode) 0.7 VDD =E2=80=94 VDD V D043 OSC1 (in RC mode) 0.9 VDD =E2=80=94 VDD V (Note 1) Ports RB1 and RB4: D044 with Schmitt Trigger buffer 0.7 VDD =E2=80=94 VDD V For entire VDD ran= ge
Grazie