Memory prices climb 500 % in 12 month

Aug 19, 2026 Last reply: 2 months ago 17 Replies
Jump to replies (17)

Memory prices climb 500% in 12 months, up to 10x the lowest ever tracked prices — 128GB of DDR5 now $3,399



formatting link


I bought a cute little Dell pc a couple of months ago.

It was $1099 from Amazon.

Last week I ordered three more. For $750 each. I didn't expect the price to drop.

formatting link

Not all reviews are positive!

Not even a DVD slot... Last big PC I assembled myself, got a nice mobo, case, power supply and some PCI cards, harddisk. Has a LG M-Disc burner BD rewriter.

It is still on the table as I have many many many disks. Runs Slackware Linux. But last time it was powered on was month ago... The other one I have is even older, has a satellite card, special audio card, has a dual boot option, runs grml Linux. I has a windows boot option I think I used that for some scanner driver...

Raspberries do all I need now, have 5, 4 are on 24/7, 3 on UPS, one spare as backup.

A Raspberry 4 including SDcards and stuff costs about 160 USD here:

formatting link

750 / 160 makes ??? > 4 Raspberries.

Bigger SDcards are indeed getting more and more expensive.

I really like it. It's small and light and runs Spice fast.

I can plug in a DVD reader if I need to read a DVD, which is very rarely.

formatting link
DVDs are big and old fashioned. We use Dropbox or memory sticks.

I finally figured out what that tiny pocket on my jeans if for. Memory sticks.

John Larkin Highland Tech Glen Canyon Design Center Lunatic Fringe Electronics

I do have an USB 3 1/4 inch floppy drive. No more 5 inch floppy drives here....

floppy

Was it not you talking about long time storage a while back? M-Disc

formatting link
years long enough? No EMP will destroy it.

I did a search for an USB M-Disc + other formats reader / writer, seems to exists. This seems interesting, no more PCs needed, just plug it into the Raspberry USB hub.

formatting link

Sure, you need a nice looking one:

formatting link
But for in your jeans use one with soft edges, I use these, 16 GB version:
formatting link
Raspberries do all I need now, have 5, 4 are on 24/7, 3 on UPS, one spare as backup.

A Raspberry 4 including SDcards and stuff costs about 160 USD here:

formatting link

750 / 160 makes ??? > 4 Raspberries.

But I am not sure you ltspice users software runs or can be made to run on a Raspberry Pi? I never use it but for some...

I find Raspberries overpriced. I have bought a Chinese Mini PC for equvalent of about 70 Euro. 6GB RAM, dual core CPU, 64 GB buitin M2 SATA flash disc. This is rather low end PC, but probably still faster than Raspberry Pi 4. And it runs Linux with satisfactory speed. This one I use instead of laptop as I have monitors at places where I want to use it.

Normally I work with desktop that I bought shortly before Trump got elected (predicting that prices may go crazy once he is in power). In a sense I could use older computer or the mini PC, but new desktop saves me time, it can do in 1 minute what the old one did in 8 minutes (and mini PC would need 20 minutes).

USB sticks are around 20 cents per gbyte on Amazon. Still crazy cheap.

Sure, but what I like about the Raspberries is the I/O pins

I have connected all sort of stuff to that, made 'hats' as they call it. In the old PC days I used the par-port :-) https://raspberry.tips/en/raspberry-pi-gpio-pinout

I never had a speed limitation problem using Raspberries. Doing some nice stuff with it. But sure some math problems ;-) or whatever may take a lot of computer power.

Anyways humans went to the Moon and back with far less hardware and software what's so difficult now?

The whole thing is getting bloated day by day, in physics (fusion power crap) in electronics > hundreds of computer languages to say 'Hello world' needing Giggle-bytes, in math divide by zero takes a lot, In politics: an ego-maniac nut-case destroying the US, Where will it go? Much of computer related / solvable stuff I can do with a simple micro. And astro, the models of what we call 'Universe' are worse than 'the Sun orbits the Earth' from medieval times.

So... with luck if we are not all obliterated in a nuclear war, maybe hundreds of thousands of years from now some of the Einstein crap and string theory and other nonsense will be replaced by simplicity But then there is AI now, needing ever more computing power, but leaving ever more out of people's capability to understand..

All for the money? Sure it is nice to be able to ask AI online about some subject and get a good reply in seconds saves some time googling. And if you do not like driving yourself ask your car to take you to ? wherever, like a taxi.

Anyways full circle , GPIO I/O is nice for hardware designers.. make 'hats'. I have made some that carry all sorts of chips, like pressure sensor, compass, attitude, Even my Microchip PIC programmer can be driven from my Raspberry GPIO.

Did Trump invent AI?

John Larkin Highland Tech Glen Canyon Design Center Lunatic Fringe Electronics

Did you forget about tariffs?

For pins I have smaller boards. I still have 2 original Raspberries and a few Chinese boards. Slightly less powerful than new Raspberries, but still a lot of compute power.

And actually, for driving pins "less powerful" boards like Blue Pill have better performance. It is hard to get microsecond accuracy on a Pi class board, timers on Blue Pill give single clock resolution and bit banged I/O is not much worse.

Flight to Moon requires more computations than human could do during flight, but very little at computer scale.

OCR (at least one that I use) needs serious compute power. Firefox has almost decent translator, but it needs a lot of CPU too. Compiling larger piece of software takes a lot of time. And in research computations demands are essentially unlimited, when we have more compute power we try bigger problems.

BTW: one can train small neural networks on a home PC, but that could take a lot of CPU power too.

Using Blue Pill I have made rectangular wave generator which generates arbitrary frequency up to 1MHz with edges accurate to single CPU clock (at 72 MHz CPU clock). And high resolution frequency counter (accuracy is probably limited by quality of oscilator on the board). Due to on board LED Blue Pill can not go to really low power, but if you disconnect the LED CPU itself can do useful work at say 10uA. I do not see how one could do something like this with the Pi (Pi-s work fine for relatively slow and undemanding stuff and when enough electric power is available).

It all depends, I do a lot of progamming for Micorchip 18F14K22 chips

formatting link

I did a 7 segment real time decoder in PIC asm, characters is not that hard:

formatting link
formatting link

And object tracking: panteltje.nl/pub/horizontal_IR_target_tracking_4686.avi Works up down too, juysts a pIC, does all video decoding too

I tried thsoe in C and used those long ago on my 486, worked OK.

Are you referring to this? (and sone something you swallowed ;-)?

formatting link

I dunno:

formatting link
Square wave signal generator software for the Raspberry Pi version B, frequency range from about 150 kHz to 500 MHz, can sweep in specified increments, has scope trigger out, can be used to scan filters etc. compile instructions are in the source. click here to download freq_pi-0.7.c. Jenny List made a new version that works with Pi 2, you can find it here:
formatting link

How about my spectrum analyzer:

formatting link
formatting link
That uses a RTLSDRT USB stick (about 50 dollars on ebay) The latest version (not on the website yet) also does FM stero etc
formatting link
It can do GPS too:
formatting link
See also
formatting link

And there is the infrared camera I can put on the Raspberry GPIO One Raspberry Pi 4 GB here records 6 security cameras + 2 sound tracks, plus weather sensor RF Many more sensors some via ethernet, some via USB (radiation for example) all 24/7 and the processor is not even fully loaded, can play background music at the same time without hickups caused by processor load 24/7 too. Has a remote control too. Plays back video OK too. Compiling does not take long, writing C code all the time, gcc ..

There is so much more, for example Raspberry Pi as FM transmitter:

formatting link

And of course I can do digital TV with my DVB stick in it too. Search Assist To receive digital TV with an RTL-SDR stick on a Raspberry Pi, you can use software like OpenPli and follow a guide to set up the RTL-SDR as a DVB-T receiver. This setup allows you to tune into digital TV signals effectively.  hashbangcode.com  rtl-sdr.com

Anything it cannot do? Anti gravity? LOL

No. Blue Pill is chinese developement board for STM32F103.

Nice, but AFAICS is has serious phase noise. I my version transion is on closest CPU edge to the true transition, so error is error due to inaccuracy of CPU clock + at most 0.5 cpu edge.

Nice, but that is based on USB connected external hardware, IIUC do not need GPIO at all.

Yes, Pi class boards are good to connect cameras to them. But that is not really GPIO, they have special camera connector. And chinese board also have camera connectors (unfortunately, each kind of board uses slightly different connector).

Sure, Pi class boards are useful. But GPIO is limited, for more demanding tasks one uses external hardware. Some hardware may be connected via UART, I2C or SPI (so essentially via GPIO), but in many cases connection is via Wifi, USB or Ethernet, so you do not need GPIO for this.

It is OK for smaller pieces of code. But when you need to fully recompile something bigger, then you want all CPU power that you can get.

Well, know your limits.

Waldek Hebisch

OK!

Yes, for precise phase I would use a Microchip PIC 18F14K22 , but does not go so high, has an internal PLL to make a 64 MHz clock, uses only milli Watts

For bigger fast precise stuff I have a Xilinx FPGA board and a Rubidium reference:

formatting link

No but it shows what can be done with Raspberries. You should really get some RTL-SDR sticks, very precise too. Save buying a lot of equipment. Also their is so much open source software for Raspberries available now.

I stopped using WiFi long ago, to easy to hack. My Rasppberyy Pi 4s are in a metal box with fan, shielding the wifi anyways.

I am not sure ? If I write code I may woek with many files, you compile one part at the time Here the Makefile for this newsreader I am using:

CFLAGS = -fcommon -O2 -Wall -D_FILE_OFFSET_BITS=64

.c.o: gcc $(CFLAGS) -c $> There is so much more, for example Raspberry Pi as FM transmitter:

What are our limits? All is connected.

It is an intersting problem, was following a progrm on German TV about where humanity will go (into space) as it must go as climate will change and the sun will eventually stop shining or shining too much for us..

Professors talking about limits, speed of travel, seems we are time limited in our species not enough time, even at light speed, to find an other habitable (for us) planet.

But then.. our understanding of what we call 'Universe' is not very good.

formatting link
Researchers at CERN have created microscopic versions of the early Universe by colliding surprisingly small atomic nuclei at nearly the speed of light.

formatting link
JWST finds early galaxies may be 4 times more massive than thought

We are just like ants in the garden

But it is fun solving and doing simple things with electronics.

The Raspberry Pi Pico cpu, the RP2040, clocked at 200 MHz, can make a

5 ns pulse every 10 ns, using inline c statements to set a port high and low.

It also has internal user-programmable hardware state machines and PLLs and PWM generators and uarts and SPI things.

Dual core ARM, 75 cents.

Here's our test board:

formatting link
The Pi configures the FPGA over an SPI port, then uses the same SPI to read/write registers.

John Larkin Highland Tech Glen Canyon Design Center Lunatic Fringe Electronics

ATM I exlusively use wired connections. But getting wires to needed places is a problem, so I understand people who prefer Wifi.

I use Makefile-s too.

Not so infrequently I need to do full compile. Have you ever compiled GNU C? It takes time. For many changes you can depend on make to do minimal recompilation, but some changes may force recompilation of lot of files. And in some cases (I met such recently) GNU C make machinery does not work correctly and one needs to do full rebuild.

I have related problem in non C context. Here "true" dependencies are that essentialy everything depends on each piece. Most of the time most of dependencies can be ignored (that is old and new version of code give equivalent effect), but for proper test one have to do full rebuild.

Waldek Hebisch

RP2040 is a nice micro. But the "Pi" in name of the board is only marketing, this is different class of boards than normal Pi class boards.

Sure, wires everywhere in the house, POE too. And some analog video cameras and audio. I think the new Raspberry Pi5 no longer has an 3.5 mm audio output jack... But I have an USB mike-in audio out stick.

I do use 2 Sitecom 8 channel USB hubs for all the stuff connected the Pi4 And 2 8 channel ethernet hubs... The Pi4s also have Toshiba 4 TB USB harddiscs connected to it.

formatting link
The 2 WiFi boxes on top of the PC left are off, but can be used if neededon the I cover up the wallwarts:
formatting link
I have a HDMI switch with remote to view all Raspberies on the table,

Yes, gcc changed defaults some time ago, so now needs the -c flag to compile my stuff. Weird people working on it! Only an idiot would change gcc defaults! It now means hundreds (mine) or thousands (others) need to change their downloaded stuff to compile it. Anyways re-compling NewsFleX after one change took less than 2 seconds, much longer to read the results.. Yes I use Imake too. It is nice all that stuff even works on other processors like the Raspberry. For my Z80 stuff long ago I used the C80 compiler, Even wrote a small multitasker for Z80 code with it.

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required