Measuring output impedance in LTSpice

Are we all short of work right now? The amount of time and energy we've spent beating each other up over this trivial issue has already dwarfed any labour saving due to being able to double-click on an attachment. I promise never to attach another one.

Let's go back to something new and fresh, such as sailing downwind faster than the wind. ;)

Cheers

Phil Hobbs

--
Dr Philip C D Hobbs
Principal
ElectroOptical Innovations
55 Orchard Rd
Briarcliff Manor NY 10510
845-480-2058

email: hobbs (atsign) electrooptical (period) net
http://electrooptical.net
Reply to
Phil Hobbs
Loading thread data ...

Well? Let's see? My 25-year-old electrolytics are forming up just ducky. I'm quite amazed. ...Jim Thompson

--
| James E.Thompson, CTO                            |    mens     |
| Analog Innovations, Inc.                         |     et      |
| Analog/Mixed-Signal ASIC's and Discrete Systems  |    manus    |
| Phoenix, Arizona  85048    Skype: Contacts Only  |             |
| Voice:(480)460-2350  Fax: Available upon request |  Brass Rat  |
| E-mail Icon at http://www.analog-innovations.com |    1962     |

      Remember: Once you go over the hill, you pick up speed
Reply to
Jim Thompson

They used to make a lot of things better, 25 years ago. I was better looking then myself. ;)

Cheers

Phil Hobbs

--
Dr Philip C D Hobbs
Principal
ElectroOptical Innovations
55 Orchard Rd
Briarcliff Manor NY 10510
845-480-2058

email: hobbs (atsign) electrooptical (period) net
http://electrooptical.net
Reply to
Phil Hobbs

The DWFTTW thing did suggest some interesting DC/DC converter configurations that I hadn't considered before.

I do like to stack DC/DCs in strange ways.

John

Reply to
John Larkin

I've always been ugly... as my young daughters once said, "Daddy, You look so extinguished" ;-) ...Jim Thompson

--
| James E.Thompson, CTO                            |    mens     |
| Analog Innovations, Inc.                         |     et      |
| Analog/Mixed-Signal ASIC's and Discrete Systems  |    manus    |
| Phoenix, Arizona  85048    Skype: Contacts Only  |             |
| Voice:(480)460-2350  Fax: Available upon request |  Brass Rat  |
| E-mail Icon at http://www.analog-innovations.com |    1962     |

      Remember: Once you go over the hill, you pick up speed
Reply to
Jim Thompson

I don't think it's a set-up issue. Perhaps I didn't make myself clear enough:

Saving the files to disk from TB works fine. No problem there. TB even uses the original file name.

But if I try to open the .asc files diretly from Thunderbird with right-click->open, then TB pops up the dialog, where you can chose "Open with: scad3.exe" and "Save File", etc. Using the first doesn't let me choose the filename, but creates the temporary file with the appended .txt as stated above.

Saving to disk first manually is good enough for me. I was just curious if there is way to open the files from TB directly.

Marcel

Reply to
Marcel

Suggest we stop that discussion here, it is no longer productive.

--
Regards, Joerg

http://www.analogconsultants.com/

"gmail" domain blocked because of excessive spam.
Use another domain or send PM.
Reply to
Joerg

She was only trying to get some money from you :)

Jamie

Reply to
Jamie

Can that be done? Wide-eyed wonder!

Grant.

Reply to
Grant

Don't start with me. Back in about July we had one of our periodic troll invasions

--
Dr Philip C D Hobbs
Principal
ElectroOptical Innovations
55 Orchard Rd
Briarcliff Manor NY 10510
845-480-2058

email: hobbs (atsign) electrooptical (period) net
http://electrooptical.net
Reply to
Phil Hobbs

'Control Program for Microprocessors' has nothing to do with DOS/Windows.

--
You can't fix stupid. You can't even put a Band-Aid? on it, because it's
Teflon coated.
Reply to
Michael A. Terrell

You're right. You won't listen, since you know everything. PLONK.

--
You can't fix stupid. You can't even put a Band-Aid? on it, because it's
Teflon coated.
Reply to
Michael A. Terrell

Ha! It prompted me to spend a couple of hours tracking down where debian stores all its mime information, and how to start wine programs with a file parameter. Just so I can get a nice LT icon on my LTSpice files and they open when I double-click them :)

That was a good one :)

--

John Devereux
Reply to
John Devereux

Michael A. Terrell expounded in news:9uadnVA8tv2-PAPQnZ2dnUVZ snipped-for-privacy@earthlink.com:

You've obviously never used CP/M.

CP/M's file system was the inspiration for the design of the DOS FAT file system, employing the 3 character suffix.

Warren

Reply to
Warren

No pun intended but if you had listened you'd know that I am not using a browser. If you had used the polite method of asking questions instead of hurling bad words you'd know that calling up *.asc works from email accounts but not from news accounts in this version. That is _in_ the _same_ program.

--
Regards, Joerg

http://www.analogconsultants.com/

"gmail" domain blocked because of excessive spam.
Use another domain or send PM.
Reply to
Joerg

Actually I have. A cartridtge for the C64, and a C128 with CP/M built in. Other OS also used a three chatracter extension, so the file name and extension fit into two bytes.

--
You can't fix stupid. You can't even put a Band-Aid? on it, because it's
Teflon coated.
Reply to
Michael A. Terrell

I think that Dec's RT11 os had a lot of influence on CPM, then DOS.

But the Microsoft DOS file structure is a lot more like Dec's DOS-11. RT11 only supported contiguous files.

John

Reply to
John Larkin

John Larkin expounded in news: snipped-for-privacy@4ax.com:

Thank you. I was trying to remember which Digital Equipment system had that. But I was too lazy to look it up.

It also wouldn't surprise me if some IBM equipment did the same about the time the floppy was being made. But I couldn't tell you what IBM systems used it. I still have some 8 inch floppies kicking around to scare the next generation with.

Warren

Reply to
Warren

Same 8.3 file naming limits, where do you think dos came from?

Grant.

Reply to
Grant

Yeah, right...

Grant.

Reply to
Grant

ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.