Can anyone tell me how I can measure coil inductance with a DMM without a special add-on circuit?
Thanks,
Steven Falon
Can anyone tell me how I can measure coil inductance with a DMM without a special add-on circuit?
Thanks,
Steven Falon
Find a DMM with an inductance range.
Do you have any other test equipment that we can also hook up?
I do have one with inductance, but feeding a signal into the inductor and resistance should give you a voltage that will indicate inductance. I can't remember if the meter i have also measures capacitance, but the procedure is the same.
greg
Basically... Put a sine gen on a RL cct and use the DMM to measure the AC level across the coil. Then do math.. Beware of the limitations and restrictions.. D from BC
DMMs with capacitance ranges are common enough, but I've never seen one with inductance - it probably wouldn't be very accurate if you did find one.
Peak Atlas instruments do a LCR meter for about the price of a good DMM.
"ian field" wrote in news:kS01i.8725$ snipped-for-privacy@newsfe2-gui.ntli.net:
ARRL Radio Amateurs Handbook had(has?) a circuit for measuring inductance with a DMM. IIRC,there was a company that offered a kit of parts + PCB,too.
-- Jim Yanik jyanik at kua.net
-- Service to my country? Been there, Done that, and I\'ve got my DD214 to prove it. Member of DAV #85. Michael A. Terrell Central Florida
eBay
ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.