1. Home
  2. Electronic Components
  3. Help identifying connector

Help identifying connector

Hey all,

I need some help to identify the manufacturer of the "DIAG" connector shown in the imgur link. I've done a lot of searching on Digikey, Mouser, etc, and I'm not having any luck. The pin pitch looks to be about 2.5 mm. The inside dimensions are about 7.75 mm by 6.1 mm. These pins wire to a serial port for use with a terminal emulator. If someone could just give a clue on the OEM I can do the rest. Thanks for any help!

formatting link

Reply to
Mike Mocha
Loading thread data ...

If you end up stuck, I would try three sections off a standard double

2.5mm pin header... Chris
Reply to
chrisnd 
--
|_|O|_| 
|_|_|O| Github: https://github.com/dpurgert 
|O|O|O| PGP: DDAB 23FB 19FA 7D85 1CC1  E067 6D65 70E5 4CE7 2860
Reply to
Dan Purgert

Wow that's it! Thanks so much! Looks like Digikey has the mating parts!

Reply to
Mike Mocha

ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.