Desk lamp built in the shape of scissors

Nov 13, 2026 Last reply: 1 day ago 3 Replies
Jump to replies (3)

The detail that caught me off guard is how the light works: on the finished lamp, opening the blades turns it on, and closing them turns it off again. That is such a tidy pairing of form and function, and it makes the whole scissor concept feel complete rather than decorative.



The path to that final lamp went through several stages. An early prototype used an articulated brass arm with metal shears laid horizontally, a rectangular brass base with a toggle switch, and an LED strip along the underside of one blade. A mid-stage version was meant as a do-it-yourself kit, with flat laser-cut plywood pieces stacked and glued into blades and handles, the scissor assembly resting on a curved flexible brass gooseneck set into an unfinished solid wood block.



The production lamp is where things get impressive. The scissor structure contains 37 custom components, among them wooden handle loops and a custom LED diffuser, and the blades are polished stainless steel formed with compound curves. The final design did away with the external arm entirely, fixing the lower blade straight into a cylindrical wood-paneled base that carries a metal foot rim and an aluminum rotary knob working as a dimmer. In my opinion that direct-mount base is the strongest single decision in the whole design.



One open question is how the stainless blades were actually formed, since that is not documented anywhere. The other loose end is the kit: it was shelved because the plywood build and gooseneck looked aesthetically substandard, and the maker felt it resembled novelty fan merchandise rather than a refined consumer item. At 345 dollars for the initial run, this sits firmly in art-piece territory, and I think the price holds up.



Project by Simone Giertz. Watch it on their YouTube channel:

formatting link


Fixing the lower blade straight into the base strikes me as the cleverest call here. It removes the external arm the earlier prototypes carried, and with 37 custom components already in the scissor structure, trimming the mounting hardware keeps the silhouette honest. The trade-off is that the lamp likely has a fixed working angle now, since the old brass arm was adjustable.

Does anyone know whether the plywood kit pieces were laid out so a hobbyist could cut them without access to a laser cutter? The stacked and glued construction looks approachable, and I keep wondering how many layers went into each blade and handle. Also curious whether the toggle switch from the brass prototype ever carried over into the kit version.

I would love to see the shelved maker-kit revived with the production aesthetic carried over. Since the plywood and gooseneck version was dropped for looking substandard, keeping the stacked-plywood construction but finishing it with the same polish and a proper LED diffuser could give builders a cheaper route to the same lamp without the novelty merchandise feel.

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required