Latest threads in Electronics Repairshow only best voted threads
Subject | Author | Posted | Replies | |
---|---|---|---|---|
|
Isolating Transformer
I was working on an CRT TV using an isolating transformer. I happened to measure the voltage between the chassis 'dag' and a nearby metal fixture and was surprised to find 75Vac. Without the...
6
|
14 years ago
|
6 | |
|
Christmas ghost/mystery story - not OT
Kustom KPS PM300 mixer amp , 2005, owner lent to a church for some do and came back intermittant failure on both channels , now dead. There is some distinctive greyish chopped strand fibre laying...
5
|
14 years ago
|
5 | |
|
Motorola supplementary TO3 stamp codes
I can't say I'd noticed them before today Is there a cross-reference anwhere ? not necessary this time but if the printed marking is faded/damaged/burnt/ground off, another time A batch of 1988...
11
|
14 years ago
|
11 | |
|
Philips FL1.10
This Philips TV model FL1.10 goes to standby when switched on - after a brief flash from the LED displays. I'm guessing the SMPS is shutting down due to a fault elsewhere. Any likely cause?
15
|
14 years ago
|
15 | |
|
Sharp 26" LCD HDTV LC-26SH12U Backlite dies after being on a couple of seconds
Was working fine until recently, the back light seems to be shutting off. After turning on the tv, the screen will light up for about 1-2 seconds then it will shut off and become black, but the tv...
5
|
14 years ago
|
5 | |
|
AC Adapter questions...
Hello, I have this fiber optic christmas tree and it is missing the AC adapter. The tree requires a 12 volt 2 amp AC adapter. I have a 12 volt 1.2 AMP AC adapter from a mini TV that fits and powers up...
13
|
14 years ago
|
13 | |
|
Marshall amp limpet knobs, uk ?
How come I cannot seem to find a UK supplier of the standard gold/copper capped domes ? I'm not talking e-bay apparent/scam suppliers , I may as well mould my own. They are not undercut so could not...
15
|
14 years ago
|
15 | |
|
Use different size wire in electro clutch?
The coil in an industrial electromagnetic clutch (connecting the flywheel to the drive mechanism) has gone open-circuit. So it is being rewound by a motor rewind shop. I was just informed that the...
72
|
14 years ago
|
72 | |
|
AIWA LCX-AC1mini system, tape amp problem
this AIWA LCX-AC1 stereo works in all modes but cassette. when play is pressed you get a thunderous crackle and hiss. This unit does not have thre traditional rec-pb slider switch, which is usually...
8
|
14 years ago
|
8 | |
|
CB transceivers
I chuckled to myself as I pondered this problem -- it reminded me of similar math/logic problems as a kid that also seemed "unsolvable" (on the surface). So, I'm looking for a similar twist to solve...
12
|
14 years ago
|
12 | |
|
Kenwood Major - how to remove the large pulley?
Hi I have a Kenwood Major mixer on which the planet hub cog is mashed; I've managed to get the requisite spare part from Kenwood but since the version I have is obsolete (after 5 years, for crying out...
4
|
14 years ago
|
4 | |
|
What's this kind of terminal called?
is an inverter. If you select the second picture, you'll see the DC input terminals. They unscrew so that a spade terminal such as this can be connected But what's the term used to describe the...
10
|
14 years ago
|
10 | |
|
Almost free old HP Power Meters for Parts or Repair.
HP-431B and HP-431C, generally good cosmetic condition, power up and meter works, no probes or power cords. $10 for one, $15 for both + shipping from zip 19004. Else they go on the curb. -- sam | FAQ:...
1
|
14 years ago
|
1 | |
|
2SC3280/81 yamaha MX1000
I am working on a old Yamaha MX1000 power amp. Each amp channel has 3 2sc3280 and two 2sc3281. ditto for the 2A1301/1302. It appears this is some sort of cascode output topology with the higher...
4
|
14 years ago
|
4 | |
|
Four questions about actual antennas and their installation
I've made great use of which I think I learned about here, and it seems to say that I would have to go at least 50 feet high -- much higher than I had in mind -- just to get 2 to 4 stations that I...
5
|
14 years ago
|
5 |