I bought this set about 1 1/2 years ago. I had to replace the bulb back in August. About a week ago it started to act up. When we turn it on, the volume comes on but not the picture, we turned it off and waited a few minutes then we turned it back on again, this time it came on audio and video. Every other day or so, it does the same thing and sometimes it takes few tries to get the picture to come on. What could the problem be? My children are fed up with it and want their old TV back. Does anybody know what the problem could be? I appreciate any input.
Trouble with RCA HDLP50W151
Dec 24, 2005
16 Replies
Art's right, it could be the lamp. These lamps don't have filaments like an incandescent lamp does. Sometimes they just won't strike, and sometimes the ballast is weak.
John
Thanks John, I am grateful for your input. What is the ballast? I don't know much about this TV other than the fact it comes with a pricey Bulb. I paid $595.00 for it back in August after owning it for only 13 months.
Thanks John, I am grateful for your input. What is the ballast? I don't know much about this TV other than the fact it comes with a pricey Bulb. I paid $595.00 for it back in August after owning it for only 13 months.
Thanks Art, I appreciate your help, but how do I check for the error codes?
It's a 50" TV, I had to call an RCA repairman because I didn't know what was wrong with the TV. Where can I get it for $250? I would like to have one on hand because it's only a matter of time before it needs to be replaced.
if its the 61" TV then you payed too much. you can get them for $250.
Real Programmers Do things like this.
http://webpages.charter.net/jamie_5
directly from RCA, i had already called then when i bought my unit just to see if the store was pulling my leg or not. i don't know about yours, but mine is user replaceable. you simply pop out some screws in the back and the assembly comes out with lamp in it.
Real Programmers Do things like this.
http://webpages.charter.net/jamie_5
These lamps don't run at 120 VAC like household lights do, they require HV at specific frequencies to run them, and that's what the ballast does. There is a bulletin issued for these models that warns of erratic lamp operation if the wrong lamp is used. Apparently, there are several vendors for the lamps and ballasts and the complete service number must be used when ordering the lamps in order to obtain the correct one. The service number is the model number plus several numbers\letters as a suffix. The wrong lamp will cause problems. Post the service number on the back of the TV.
My parts price list shows the lamps were $598.00 in the June 05 list.
John
How long are you seeing these lamps last. So far we have not seen a single one make it to 2000 hours.
mine is suppose to be rated for aprox
8500 hours. thats about 3 years of average tv usages. now in my home, the damn thing seems to be on 24/7, having problems with the members of the house in just walking out the door leaving it on with no one there. its been like this for 2 years now and it still seems to be ok.
Real Programmers Do things like this.
http://webpages.charter.net/jamie_5
P.S. the first unit we brought home lasted 8 hours and then generated lamp problems. halling a 61 DLP wasn't my cup of tea for a 35 mile run in a pick up truck. we made the store deliver another one. we also noticed that there was a slight film of dust on the back of the tv that would met the unit must of been sitting around for a while before it got boxed! sounds like i got a line pull! well guess what, they got it back ! :))
Real Programmers Do things like this.
http://webpages.charter.net/jamie_5
The service number is HDLP50W151YX1. I had the bulb replaced by an authorized RCA representative.
I haven't been keeping track really, although I have seen several lamps of different brands failing in under 2000 hours. Oddly, I haven't had a call for an RCA lamp failure although I hear many others do.
John
For service number HDLP50W151YX1, the correct lamp number would be
260962. The correct ballast would be 261629. Both of these are described as "type A".John
Is there a way for me to get a trouble code for this condition?
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required