1. Home
  2. Electronics Repair
  3. Sony TV KV-C2508D (BE-3C Chassis) 6x LED blinks

Sony TV KV-C2508D (BE-3C Chassis) 6x LED blinks

Hi,

my grandmas Sony TV KV-C2508D (BE-3C Chassis) has started to fail randomly and shutting down. First the broadcast is gone when watching a channel (picture as if not tuned in) and then the set turns off itself immediately, letting the Standby LED flash 6 times. The set can be turned on afterwards without trouble and continues to run fine until at some point the problem occurs again. My dad is at her place now and he is probably going to bring the set.

I already have the service manual for the BE-3C chassis. I suspect it to be a problem with the soldering of the tuner grounding (common problem), but I also want to let you guys give your voices, too.

So, any specific suggestions ?

Adrian

PS: Happy Easter.

Reply to
Adrian Glaubitz
Loading thread data ...

Adrian Glaubitz a écrit :

Hi, it is probably the tuner particulary if it was made in Spain. It is pretty difficult to fix the bad solders in it. It is much reliable to change it, you can use a UV916E Philips tuner.

--
--
Marcel Beysselance

marcel@hi-tek.fr

http://marcel.beysselance.club.fr

www.hi-tek.fr
Reply to
Marcel Beysselance

Thanks alot for the information, that will help alot. I will check that !

Adrian

Reply to
Adrian Glaubitz

ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.