Hi , having this LED television that when putting power AC , the power LED is always blinking .
It's not a code and cannot power on the tv.
the 5 volts standby is OK and I don't see caps that are leaking.
Any suggestion ?
Power LED keeps blinking -Sharp LC32LE700
Jan 24, 2011
5 Replies
Get some technical literature and maybe it will give some insight as to what conditions are required to make the indicator to blink.
Live Fast, Die Young and Leave a Pretty Corpse
check all the caps with an esr meter... here you can choose one to build from many schematics :
formatting link
have a look ! regards,
---
Kripton
All Caps seem to be OK. ESR is less than 1
Unplug the backlight inverter. When these fail, they can cause this sort of symptom on some TVs
Arfa
Ok , here is what I did ;
-unplug the TV
-Press VOL- and INPUT at the same time
-Plug TV
TV turned ON with a LK on the screen.
When turning off with power button , POWER & OPC Led blinked 2 times togheter and power led blinked 3 times alone .
What does this code mean ?
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required